Jump to content
SAU Community

Recommended Posts

Any help would be appreciated here My 32 GTR has developed a stalling problem an it's really starting to piss me off. If there is anyone that has experienced this problem in thier car like before your info might be helpful ive asked quite a few people about this drama an i have taken it to a couple of work shops an they an haven't found anythin it's even been on the dyno at Advan Performance an nothin showed up there it's all most like it doesn't like shown up till i drive it. :laugh:

Link to comment
https://www.sau.com.au/forums/topic/140720-stalling-problem-wont-go-away-gtr/
Share on other sites

Can you give some symptoms of when it stalls?

How it stalls (Does it sputter and cough and then die, or just CONK as if you turnt it off, or does it slowly drop the revs until it dies?)

Conditions under which it does it? (Driving normal, after a hard hit on the throttle and then just releasing the throttle and putting clutch in?)

When it's cold/warm?

Only at night/day (Air temp variability)

More info please.

Yeah thats wat i reckon definately wierd alright. Originally i thought vacuum leak but ive checked jus about every hose out it is fairly modified car apart from internals an turbos. But it's drivin me crazy ive checked the most obvious connections from air flow meters to wiring loom connections.

Hey MBS206 matey all of wat you have said it jus drops out when it feels like it very unpredictable it only basically started happening jus before the Power/FC went in

Have you replaced the fuel filter? Fuel pump?

How old is the battery? As has been said numerous times before, Skylines are VERY sensitive to voltages; if you have a sus battery, it's totally unpredictable how the ECU will handle that.

So just before you did the PFC it started mucking up.

Just does it randomly? I'm putting money on a very small vacuum leak. I had one also, and mine just randomly stalled. Fixed the leak so far, and it's not stalling. (So far)

Checked the bov? It could well be leaking where BOV joins intake piping.

Does it like to stall if you do a slow gear change whilst cruising along?

Fuel system is ruled out because every thing that relates to the fuel system has been replaced an is brand new etc Fuel inj, fuel rail, braided hoses, external pump an internal fuel pump, billet fuel filter.

I was driving it to day an it was really bad. I'm thinkin it might be a vacuum problem to jus with the symptoms an all.

The battery is no more than 5 months old so thats out the window too. The timer is reading 13.5v in normal driving conditions.

Ive descreened the AFMs, but where they bolt on i know they are cracked would that cause the problem do you think

Please tell us more.

Simply stalling?

Does it cut when your driving.. just loose all power come to a stop on the side of the road, start her up and your off again?

Stalls approaching traffic lights/gearing down etc?

Cruising along does it buck? Then in a similar fashion stall if at low rpm?

Off the top of my head..

Regardless of if things have been replaced or not when its playing up:

Check AAC 'solanoid' is working correctly

Check pwr steerpump idle up is working correctly

Check a/c idle up is working correctly

Check Cas

Check fuel pressure

Check vacuum leaks

Check all earths.

Swap out ecu's

Ive descreened the AFMs, but where they bolt on i know they are cracked would that cause the problem do you think

Put the screens back in (You're talking about the mesh yeah?) and then fix the cracks.

Cracks will enable un metered air, and unfiltered air, to enter the system.

Basically, the car can't tell how much air is actually getting to it!

Even if you just get a roll of duct tape so you can drive to the shops to get the AFM cracks fixed.

I have cracked AFM and it didn't stall until the roller bearing turbo went in, then i start to have this stalling issue as well.

Basically while driving, come to a fast stop, car will stall. Just recently found out its the stupid after market BOV that leak. Luckly i managed to scored a whole stock BOV kit for $100. Ready to go in.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Swapped the injectors around and the misfire followed. I went ahead and ordered the Deatschwerks 550cc injectors and am currently waiting for them to be ship and arrive. In the meantime, I've had my Nistune soldered to the ECU. Tested it, and and tried it out with the software. Everything should be prepared for when the injectors arrive.  
    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
×
×
  • Create New...