Jump to content
SAU Community

Recommended Posts

Neil went falcon in about that price range and is very happy with its towing....but I couldn't lower myself to buy a local POS.

So i bought an imported POS instead, navara ute, cost about 4k, rated to tow 3 tonne came with air and power steer (both essential if you are dragging big loads everywhere). the motor isn't up to the job it is only the 2.4p really struggles on hills.

Hahaha

yeah thats what i think. i dont want something local! So i've got my mind stuck on the ford maverick which is a patrol anyway!

Nissan ftw!!

i thought commodore manuals only had 1600 tow rating bercause of duel mass flywheel.

i am going through the same process at the moment,

i am looking at xh falcon utes, get a good one for well under 10

The dual mass flywheel is in VT onwards.

VS pre is all single mass.

Hence why clutch change in VS = around $500 all fitted and VT onwards alot of the time is $1500 onwards.

80 series turbo diesel Landcruiser will do the job just fine and she will pull well uphills with reasonable fuel consumption.

You may have to fork out a little over $10 k though and they are 15 years old now but tough as nails .

You need brakes for over 750 kg loads , overiders on one axle up to 2000 kg, anything over that you must have a break away system and its easier with electric over hydrolic these days, just like the brakes on some cars, like bmws even 100 series landcruisers have them .

Oh good!

It will be able to go in the drift entrance at Oran Park :yes:

Haha yeah well thanks for all the help guys!

i've got my mind stuck on one car at the moment!

the pajero/ford(ewwww) maverick.

i like the 2 door (i can say in 5 years i havn't owned a car with more than 2 doors). they are 4.2L and i find a few are on dual fuel which is a bonus also! and hopefully i can find one like the one above with a bit of suspension work so i can take it off road.

hopefully vegas is good to me again this year!

Edited by Angus Smart
Oh I forgot to mention another option, I just bought a stagea, $11k add say $1k for towbar and oil cooler and you have something a bit nicer than a foulcan to drive around

hey hey! now we're talkin!!

shit i hope i do very well in vegas then!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...