Jump to content
SAU Community

Recommended Posts

hey guys

did a search but cant find many actual answers with proven results. everyone says 'yes my exhaust is quiet' but havent actually had it tested.

just got off the phone to a tester who claimed that no 3" system will be under 90db. can anyone prove him wrong? ive got a 3" split dump to a wide body hiflo cat, 3" cat back system with a hotdog muffler and jazma oval muffler. he claims it will be over 100db.

what have you guys got.

Link to comment
https://www.sau.com.au/forums/topic/142024-how-loud-is-your-exhaust/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

my system is pretty loud, was a peII but took the centre part out and got a custom 3" straight pipe made for it or the same diameter. So i got a 3" dump big body cat and straight pipe to the rear >_<

My old 80mm catback with proper mid muffler and enormous rear muffler came in at 92dB at 4k. This was with a 3inch dump/front pipe and regular old ceramic 3 inch cat and highflow turbo.

I reckon the stock turbo would have dropped it a touch more as there was a noticable increase in exhaust noise after i went highflow

yeah would be hard to find a 3 inch that'll make it under 90db

mine used to be 115, but that system was rediculous...

stop livin in the past man !!!!!

:)

how do you measure the db's anyway? i havent got a db meter.

CES dump pipes and 4 in straight thru no mufflers at all (track only car so no Cat) its fkn loud

Hang on is that a dB tester up my ass...when i extract it Ill get a reading

Edited by gtr660hp
3inch all way, as quiet as my wifes 'frontal' wet-farts

:):P:O

farken hell, did ya have to ??? huh? damn :O

i just put a 3" highflow cat on my turbo back 3" exhaust (mild steel, mandrel bend). and the fuccker is now slightly louder, but also very droney. i cant stand the drone. dont like the drone. would like the drone gone.

will a resonator return it back to the nice throaty note it had when running a 2.5" standard cat?

My friend has a db tested thing. Same as the exhaust place uses. He tested my exhaust at 108 db from memory. Then i made up this thing to go just after the cat. Just got a bit of tin cost me $1.75 from bunnings. Cut it to the size of the gaskit. drilled some holes in it and put in in the exhaust. Got may mate to test it again and it was 92db. The exhaust shop tested it at 86db.

Removed it after the test. I have a 3" system.

Mine was 86db at 800rpm... Went do 105db at 4000rpm or something stupid. Thats 3inch from the dump pipe back (stock dump). Just the cat and a cannon.

Then I got two big arse mufflers put on 84db at 4000rpm. Still 3 inch. Its just so much better, I can now hear my stereo on the highway.

the trust pe2 is def below the legal limit of 92db - it produces a very slight howl between the 3k and 5k range - but compared to the blitz nur spec its almost like a standard exhaust.... I think someone said its at 88db or there abouts

the trust pe2 is def below the legal limit of 92db - it produces a very slight howl between the 3k and 5k range - but compared to the blitz nur spec its almost like a standard exhaust.... I think someone said its at 88db or there abouts

The legal limit is 90dB for passenger cars according to the information available from the official ADR website:

http://www.dotars.gov.au/roads/motor/design/adr_online.aspx

in particular, ADR 28 is what I'm referring to.

Note that ADR 83 apparently supercedes 28; but ADR 83 has plainly been written by someone who was smoking

some kind of illicit substance at the time (it's full of conditions like "if it's the second tuesday in the month after 2pm

but NOT in a full moon, subtract 1dB UNLESS the car is owned by an Amish vegetable farmer in which case add

1dB ENSURING that the summer solstice is observed"). I had a quick browse through 83 and I was unable to

determine what the noise limit for my car within 30 secs; ADR28 allows ready lookup so plainly our pollies

are doing their jobs of making things even more incomprehensible.

Idiots.

edit: T04Z, HKS 50mm gate, 4" stainless exh, 6" cat, 6" resonator, large muffler w/ steel wool:

85dB with restrictor fitted and closed

89dB with restrictor fitted and opened

93dB with no restrictor

97dB with small 6" rear muffler

Any exhaust place with a dB meter can measure; the measurement procedure is defined in the ADR.

The meter is supposed to be calibrated regularly too.

Regards,

Saliya

Edited by saliya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...