Jump to content
SAU Community

Recommended Posts

Hi everyone,

I did a quick search for “oil pressure” but as I am posting under major panic I didn’t come across anything that was relevant to my problem.

As I am currently running my motor in (trying to clock up 500km) I have notice oil pressure drop. I realize that a bit of drop is ok but today when I was at the lights I noticed that the pressure was getting awfully close to 0 on my oil pressure gauge and kept hovering below 2. As I pulled into my driveway I notice the gauge went right down to 0. I quickly switched the engine off to prevent any damage.

My question to the general populus here in FI section is: Is this a normal occurrence? Can anyone hazard a guess to what the problem might be?

Any help will be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/142836-oil-pressure-getting-close-to-0/
Share on other sites

is the "low oil pressure light" on?

No light isn't on.

get an aftermarket gauge.. 1/100th of the price of a new engine

You are right; I'm going to look in to getting one now

before you do anything else, get yourself a new oil pressure sender unit.

Do you believe my sender could be shot? If so I’ll get one from Nissan.

Do you believe my sender could be shot? If so I’ll get one from Nissan.

if its an r32 then it very well could be.

it seems to be a common problem with them.

and as Waz has stated, getting an aftermarket gauge is best (but you'll need a sandwich plate etc). so go with the new sender unit first.

try spray the sender unit with that contact cleaner stuff..

after my engine was put bak in my car i had a similar thing.. when the car was hot the oil needle would sit on like 1psi at random times. the sender unit was all oily and decrepid looking.

go have a read on www.aus300zx.com in the technical pages.. they have a big writeup about changing the OPS (oil pressure sender unit)

many of them changed their unit only to have it fail again after 6 months...

my setup:

gauge (ebay) comes with sender unit - $30-60 depending on what brand

sandwich plate - $25 from justjap

i mounted it in the glovebox. still can use the stock gauge for hte oil pressure warning light (which is accurate)

plus its WAY more accurate than the stock gauge

good investment me thinks

Yeh i had the same problem and i shit myself, on idle after driving for a long time it would drop to just above 1 on the guage but the light didnt come on which was good.

But then i used different oil and it doesnt do it anymore haha, still gets low sometimes though.

I think most 32s have shotty oil pressure guages.

BTW new engine as well with 1,000km on it. New guage is on the agenda.

Thanks everyone for all your help.

I purchased an Autometer oil pressure gauge that I am going to install tomorrow. I'll let you all know if it works. Just one last question though, at what PSI should my oil pressure gauge be reading at idle?

When cold ive seen it around approx 70 psi at idle

When warm around approx 24-25 psi at idle

Thanks champ! I'll use that as a reference point

Please be aware, the standard nissan oil pressure guage reads in KG/cm^2 not PSi.

Yea, I have disconnected the standard one now and installing the Autometer which is in PSI. Thanks for the heads up though!

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...