Jump to content
SAU Community

Turbo Timers And Where To Get Them Fitted

gargantua

By gargantua,
in Victoria

 Share

Recommended Posts

gargantua Enthusiast

gargantua

Posted
Posted

Hi guys,

Just got my first skyline 2 weeks ago been haveing a blast in it. So far I have put in a new sterio and an immobiliser, I am now looking at getting a auto turbo timer.

What I would like to know is whats the difference between the expensive Apexi, Blitz etc... and the other auto turbo timers they sell over here at autobarn, supercheap auto, repco etc...

Ideally I would like the timer to go under the car sterio because there is a huge gap there from where the old jap sterio use to be.

So any ideas guys on where to get a reasonably good one that dosent cost me too much to purchace and get fitted.

Thanks.

eMsta Grand Master

eMsta

Posted
Posted (edited)

i bought my greddy turbo timer from bt-revolutions - then got it installed at RE Customs.

Any of the sponsers of SAU will be worth while checking. I got the greddy one cos its a turbo timer, and also calculates the 0-100 time and 0-400m etc....but the other good one is the Apexi timer, but thats only a timer.

Edit - the HKS one is a bit more expensive, but the autobarn guys keep saying that its caused their customers a lot of problems. I dont know how true that is - but i dont trust autobarn cos the dickhead (must be like 20 years old and working as a casual) gave me the wrong wheel lock nuts and said that he is sure it will fit my wheels.... So my advise is to go to someone who knows their stuff, a proper import mechanic or stores that deal with imports and accessories for imports.....

Edited by emsta2003
Kaz200 Grand Master

Kaz200

Posted
Posted

my greddy FAT broke within like 12months or something.. meanwhile the HKS Type 1 (on diff car) has been going for nearly 5 yrs now.. Haven't tried the Blitz but personally I think its ugly.

My other half said bring over some beer and he'll install it for it you.. but we're in Lalor/Epping.. so depends how far away you are.

Best bet is to get a HKS with a harness.. Jaycar have cheap turbo timers as well but you have to assemble them, I think there's a group buy going atm through funkymonkey/Shan.. don't get a TT from Autobarn caus they're ridiculously priced (high overheads what can you do).

Roy Grand Master

Roy

Posted
Posted

How about you DON'T buy one and save both the money of the timer and install?

You need a turbo timer as much as a glorified Lancer needs a vortex generator.

Biggest wastes of money ever - just drive the car easily for 2-3 minutes before you stop - or if you are at the track, let it run for a while in the pits and cool down.

Now buy me a case of Carlton Draught and you'll still be $60 ahead.

ABuSD Veteran

ABuSD

Posted
Posted

Throw Andrew from Kudos Motorsport (sponsor on here) a PM about his Pivot Super Baby Timers, good price and nice and simple to fit and use, although IMO a very popular choice is the apexi T/T because of its extra functions and price Usually around the $120 mark.

Im personally about to buy a Pivot TT and install myself, if u can install a deck, a TT is just as easy :)

dezz Grand Master

dezz

Posted
Posted
thats all good in theory til you are in a super late rush and the last thing you're thinking about is driving easy :)

Turbo timer = easy, lazy and you can just forget all about it

and that is the exact reason I haven't sold mine, and still want to get it fitted ;)

Won't use it half the time, like this wanker at the petrol station today, but its good to have when running late, when you're most likely on boost until you park it :)

The dude at the servo today cruised into the servo just before me (so I know for a fact he was taking it easy), and stood at the pump waiting for about 60 seconds while the turbo timer ran. I had almost filled up and paid before he started ;)

Oh and Kel, if you know how to install a TT into an alarm with a TT interface, then do mine for me please ;)

Kaz200 Grand Master

Kaz200

Posted
Posted
The dude at the servo today cruised into the servo just before me (so I know for a fact he was taking it easy), and stood at the pump waiting for about 60 seconds while the turbo timer ran. I had almost filled up and paid before he started :)

are you sure you aren't mistaking me for a man caus I did the same thing today hehe :)

dezz Grand Master

dezz

Posted
Posted

do you drive a green s14? :)

I thought it was funny...I'm not one to turn off my car straight away....but when i've cruised off boost entirely, and pull in to fill up, I dont sit there and wait...was funnier because he was out of the car standing there with the fuel door open waiting :)

blind_elk Grand Master

blind_elk

Posted
Posted

I'm with Roy on this one. But you can keep the Carlton, so you'll be even further ahead.

thats all good in theory til you are in a super late rush and the last thing you're thinking about is driving easy :)
Then you need too plan better. And whatever you are heading for will still be there in the 30 seconds you lose by driving sensibly.
Turbo timer = ... lazy...
Exactly!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • joshuaho96
      Ethanol Content Sensor - Always at 11%?

      By joshuaho96 · Posted

      The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...