Jump to content
SAU Community

Recommended Posts

A few people have shown an interest in my new little toy - the Orange TPMS (Tyre Pressure Monitoring System) and wanted to know more about it. I must admit I first heard about it fro Jeff Beable who runs one in his Targa car - but then also was shown 1st hand the effectiveness of them on the Maserati Quattroporte James and I drove which told me about the flat tyre before I realised.

I'll have it on the car this weekend at DECA to get a real feel for how good it is but basically it's a little gadget which has sensors fitted inside all 4 tyres which then provide information on both tyre pressure and tyre temperature to you live in your car. You can also set "alarm" points for low tyre pressure and high temperatures.

I got mine from Bit Distribution in Bayswater for $315 - Bit Distribution

In the last 12 months or so I've managed to delaminate a number of semi-comps on the skidpan basically from over heating - so I'm hoping this will help stop me from doing that. Also - earlier in the year I destroyed a tyre from driving on it flat (sidewalls were so hard I didn't realise it was flat until it was too late).

So pretty much if this thing can save me 1 tyre it will pay for itself. Also it means I don't have to get out and check each tyre regaularly on the track and can also get a better understanding of how quickly tyre temps come up and go down on the track because I can see all the data live. It will also show me if my tyres are overheating due to excess wheel spins on the skidpan.

More information on the unit is available from thr Orange Website here - Orange TPMS

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/
Share on other sites

Hey Snowy

Ive had TPMS on my 34 for the past 12 months, its a very handy gadget :P

Mine is a little bit different as it displays all tyres at the same time, its seems the one you have displays one at a time

Ive attached a pic of the display, note pic shows tyre pressure in bar but is selectable to psi

Cheers

post-5908-1163674380.jpg

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2679286
Share on other sites

how much 4 ur one CNBLOW...not that I need it, but I like buying stuff.

actually as Snowy said, I had the issue of driving on some low profiles and it was flat and I didn't know....wellldidn't know until I went around a corner and the tyre came off and I just missed an oncomming truck as I span out...not cool.

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2679581
Share on other sites

Mine is a little bit different as it displays all tyres at the same time, its seems the one you have displays one at a time

Details would be great,

One of these would have been handy when my tyre went down through the flip flop at calder!

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2679620
Share on other sites

hey guys

The TPMS i have is direct from the manufacture, i did extensive R & D for more than 6 months on this product alone working in conjuction with the manufacture to get his product 100% (ie software bugs)

If people are intrested in the product, i can try and find out some prices if needed

In the 12 months i have been using it, its never failed once

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2681898
Share on other sites

hey guys

The TPMS i have is direct from the manufacture, i did extensive R & D for more than 6 months on this product alone working in conjuction with the manufacture to get his product 100% (ie software bugs)

If people are intrested in the product, i can try and find out some prices if needed

In the 12 months i have been using it, its never failed once

hey mate

details...who makes them and roughly how much. where are they located?

the other one Snowman posted is pretty wicked though. Reading through the install manual it looks pretty easy.

Hey Snowy...does the trasmitter sit around the existing tire valve..i.e. the valve stick through...I couldn't work that out. I saw they installed it from inside...not sure how its gonna look I wouldn't mind I pic. The dispay unit looks tops though.

KJ

Link to comment
https://www.sau.com.au/forums/topic/143398-tpms/#findComment-2682911
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...