Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Items:

wanted - r32 skyline 4door or coupe .. must be turbo and 5 speed .. (or auto but cheap enough for conversion)

Extra Info:

any colour except marrone/red.. just doesnt tickle my fancy..

Contact Details:

[email protected] or 0411 729 926

Price and price conditions:

12k or under.. CASH!

been looking for a while, nothing has come up that has been exactly what i want..will consider importing again if i cant find one soonish..

Items:

boss kit to suit either dato 1000, 1200 or 120y ( early model) or gemini ( you heard me right) they all fit my skyline gt......

Extra Info:

dont need a wheel but i would like them to be 6 bolt boss if possible ( unless it comes with wheel)

Contact Details:

[email protected], pm me here or 0403795032

Price and price conditions:

nothing to stupid......

just thought i would try my luck and seee if any one had one lying round.....

cheers, Pete

Item:

I'm looking for the RH-side plastic mesh insert that goes into a standard Series 1 R33 Type-M front bar.

Extra Info:

I hit a fox coming home on Christmas Day, didn't realise until I got home that the mesh had popped/broken off.

Contact Details:

PM me.

I don't need the whole front bar, there are some chips in the paint which is easily fixed but I'm finding it hard to find this piece of plastic.

Cheers

EDIT: Please delete - Bought a brand new one from Nissan ($80)

Edited by Richie33

NEEDED ASAP!!!

Items:

R33 or R34 GTR front seats (both passenger and driver)

Extra Info:

Would prefer poor condition to keep them a bit cheaper as they will be recovered any way. But will consider any condition. Dont need rails either. Would lik to see pics of them. If no pics would inspect before buying

Contact Details:

Either on here or email me [email protected]

Price and price conditions:

depends on the condition i guess $600+ have GTST series 2 seats in perfect condition to swap plus cash. or any other parts that are needed etc

Cheers

Adam

Items:

15" rims (YES NOW I AM LOOKING FOR 15s) - 4x114.3 stud pattern

Extra Info:

Basically going to be drift rims. Dont have to have tyres, or if they do they dont hav to be in good nick (can always get a few laps outta them). Doesnt matter if lips are gutter raped. Dont want buckled or generally f**ked rims. Looking for ~ 2 pairs. ANY SILVIA/180SX/NA SKYLINE/CEFIRO STOCKIES MORE THAN WELCOMED

Contact Details:

PM here or by mobile (SMS preferred for now as will be at trade school for next 2 weeks) - 0409 049 299

Price and price conditions:

depends on condtion, etc

Edited by SERTY-1

Items:

stock r33 and r32 rims

Extra Info:

need a whole set. willing to pay reasonable price. tyres are not neccecary. condition does not have to be perfect either, they are for a daily.

Contact Details:

PM me.

Price and price conditions:

depends on whether it has tyres or no tyres, and also condition.

Wanted to Buy

Items:

rear muffler

packed and baffled but free-flowing

3inch inlet

3inch outlet

centre to centre setup

Extra Info:

mild steel is fine

stainless steel ok

100ct gold would be nice

Contact Details:

PM me.

Price and price conditions:

not too expensive

Items:

R34 GT non turbo

Extra Info:

Manual, 2 door, good condition, preferably yellow but doesnt matter, preferably stock

Contact Details:

PM/Email

Price and price conditions:

under $20000

Items:

R33 GTR Rear Wing

GTR Puel Pump

NISMO 320kph Speedo

GTR Front seats (pair)

Extra Info:

All must be in good condition

Contact Details:

Pm Me or email [email protected]

Price and price conditions:

Show me the parts then we will talk price! :D

Items:

R34 Gtt (4dr) standard exhaust

R34 Gtt front & rear brakes (rotors & calipers needed)

R34 Gtt plastic under front gaurds L & R

Extra Info:

need parts 4 compliance. i know there are nice ppl out there that will lend but i will need to hold on to the parts 4 a while

Contact Details:

Pm Me or call me on 0411 758 793

Price and price conditions:

price depending on condition of parts etc..

Items:

Vertex SIDE SKIRTS for 2Door R32

Vertex REAR BAR

Any style of VENTED Bonnet for R32 GTST

Extra Info:

Would prefer them ASAP and in good condition (don't care if they have been painted already)

If you have at least one of the listed parts still contacted me with a price of the listed part.

Contact Details:

PM or Mobile 0401 38 77 26

Price and price conditions:

Store prices or less

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...