Jump to content
SAU Community

Recommended Posts

Urgent ...

Need that little hose behind the head/lower plenum, which connects from the lower intake plenum to the hard pipe which goes to the turbo around the back of the head. Its a little coolant elbow rubber hose.

Please PM me or call 0449 928 227 if you have one.

:thumbsup:

WTB - V35 18" wheels, premium spec, like these ones that someone had for sale on here a little while ago, i missed out.

http://www.skylinesa...ims-with-tyres/

If you have any that you'd like to part with, let me know via PM

Also chasing an RB25 clutch fan assembly including viscous centre.

Edited by Sorin-Andrei

WTB CAS Sensor R34 GTT. According to the web, its model 23731-5L30A which fits:

Nissan Skyline R33 GTS25 (RB25DE) / GTS25-t (RB25DET) / GTS-4 (RB25DE)

Nissan Skyline R34 GT (RB20DE Neo 6) / 25GT (RB25DE Neo 6) / 25GT-4 (RB25DE Neo 6) / 25GT-t (RB25DET Neo 6) / GTR (RB26DETT)

Tried to go down to JIS this afternoon, but despite their website saying closing time at 3pm, turned up a little after 2pm and closed up.

Hi guys, had some work done on car, looking to upgrade ECU from the stock rb25det one, mine is an Auto Coupe'! been looking seriously at getting NISTUNE :D does anyone have a nistune board to suit even if its in the Z/R32 ecu as long as its all prepped for auto R33 :-)

definitely the next addition to my car I believe to make a difference in the overall drivability/power/acceleration etc of the car to get this nistune and get a proper tune done :)

thanks guys if any1 has one to sell or can suggest a good place to get one?

CHEERS

MIKE

Hi guys, had some work done on car, looking to upgrade ECU from the stock rb25det one, mine is an Auto Coupe'! been looking seriously at getting NISTUNE :D does anyone have a nistune board to suit even if its in the Z/R32 ecu as long as its all prepped for auto R33 :-)

definitely the next addition to my car I believe to make a difference in the overall drivability/power/acceleration etc of the car to get this nistune and get a proper tune done :)

thanks guys if any1 has one to sell or can suggest a good place to get one?

CHEERS

MIKE

Best bet is to find the best ecu for the application in the second hand parts thread (I see them all the time) and then see Pete from PLMS for a cable,nistune board + installation - he'll take care of you

Got mine around 2 years ago, was a great investment

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...