Jump to content
SAU Community

Recommended Posts

Wanted to buy

Nissan stock intercooler piping in 2.25in

Stock inlet pipe to suit rb20 turbo

2nd hand r33 turbo, must be cheap and usable

Starter alternator wiring loom to suit rb20

Swaybar saddles and bushes any cond to suit s13

WTB Z32 Stock ECU , the 8 bit ECU would be most desirale. Can be any JDM , EDM or

1990-1992 USDM model ECU. It does not matter if the ECU is naturally aspirated or turbo,

manual or auto. (Nissan part numbers 23710-30Pxx, 31Pxx, 37Pxx, 40Pxx, 41Pxx, 46Pxx,

47Pxx and 48Pxx).

WTB Z32 Stock ECU , the 8 bit ECU would be most desirale. Can be any JDM , EDM or 1990-1992 USDM model ECU. It does not matter if the ECU is naturally aspirated or turbo, manual or auto. (Nissan part numbers 23710-30Pxx, 31Pxx, 37Pxx, 40Pxx, 41Pxx, 46Pxx, 47Pxx and 48Pxx).

Cancel that, scored A18-A72 MB6 91 300ZX (late) N M F Z32-VG30DE 23710-30P60 from ebay USA for $30 ..... thats only $300 cheaper than Japco and $240 cheaper than Japanese Import Spares, Adelaide Z cars and Nisswreck.. :-)

Rb26 long motor in good condition or rebuilt.

rb26 boost control soleniod

thanks

Rb26 long motor in good condition or rebuilt.

rb26 boost control soleniod

thanks

Hey mate have one for sale, give me a call on 0403431194, rb26 long out of a r32 GTR.

DSC02471.jpg

DSC02470.jpg

150,000 km after $2400. Removed turbos etc already and injectors. Everything else is there.

Comp test

Edited by GTR1993

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
    • There is an ABS pump and a few solenoids. You could trigger the front/rear solenoids with a pressure bleeder attached with a Consult 2. 
×
×
  • Create New...