Jump to content
SAU Community

Recommended Posts

Hey guys,

Quick run down.....7 runs at WSID last night - 14.7 @ 95.

this was 5 of my 7 runs. (other 2 I totally screwd up - missed 3rd!)

Ok - car is 33GTST series 1.

usual mods...

unifilter pod, fmic, turbosmart boost controller (sinle stage - 7 - 12psi) and 3 inch dump pipe, standard cat and 3 inch cat back. (exedy heavy duty cutch)

and HKS fuel cut defender - these mods made 195rwkw tuned at UAS. (air / fuels all good)

Now, last night - the car was beaten by skyrines with much less power and mods.

My 60 footers were 2.1 and 2.2 (best was 1.9 standard)

On standard 7psi I was doing 14.7 @ 95 and on 12psi - 14.7@95 - no difference at all.

I noticed on the higher boost setting, the car was surging/bogging down on gear changes - not wheel spin

On lower boost, wasnt bigging down but you could hear/feel it "chirp"

my gear changes werent that slow nor that harsh (treat it with some respect! haha)

(last month only got 2 runs in and did a wheel spining 14.6 at 99.7 - 2nd run blew a cooler hose)

Just need to know, wtf is going on with my car? a standard series 2 with just a turbo back (nismo god from here) did a 13.7 and mr moo also did a 14.1

Has this ever happened to anyone here?

What should I do or what should I change?

My tyres werent the best but held up ok.

Im thinking new plugs, get the injectors looked at, and the fuel filter - anything else?

Thanks guys,appreciate your help and comments and sorry for the long post

Cheers,

Chris

Link to comment
https://www.sau.com.au/forums/topic/143744-what-is-with-my-car/
Share on other sites

you could've just been having a bad night.

i'd get rid of the stock cat though. that will help a bit.

the bogging sounds like it may have been your plugs, or it may have been pinging and the ecu was backing the timing of a bit.

turbo back he had sorry.

nismo god from nsw section.

he then had slicks from benm (also from nsw section) and did a 13.4

yeah plugs are getting done now!

mad - Im always have a bad night at the drags haha

your max speed looks a bit down bud. i thought it wud be above 100mph with 195 kws. your 60 footer looks good. is your car pinging up top? i think that mite be the problem, cos youd be losing power. with 2.0 sec 60 footers it dusnt look like ur launch or tyres are the problem

Sound to me like you might have come to the point where you are battling R&R! Try some sort of engine managment I reckon! Oh and a decent cat for sure! The complicance one is nasty and by far the biggest restriction in the exhaust

Hey bud, somethings definately wrong with you setup. . .

I have: Full exhaust, china FMIC, HKS pod and Bosch 044 ~ 180 rwkw

my 60' times suck and i'm able to do flat 14's

If you are surging/bogging down I'd say R&R, you are missing ~ 5 mph at least, 60' foot times are good. . .

check your AFM sensor isn't oily/dirty, recently had that problem with the HKS filter, have a new filter going in asap. . .

good luck

Jays

possibly just practice (no offence) - but with 205rwkw in my s5 rx7 (i know may've been a little lighter) when i had it i did a 12.9 @ 108 with 1.8 60ft with chromies on and the doof doof install in the boot...

gear changes and getting that perfect start all helps.

those other guys with the quicker times, how many times have they been out?

good luck with it, hopefully you can get a flat 14, high 13?

If you think you have 195rwkw and are only running 95mph, then you are kidding youself.

Whoever dyno'd your car - made it look high.

I laugh at all of these people that say "my car has this rwkw" and then when I say thats not right, they get all smart assed about it and tell me I am jealous or something.

Then someone goes down the strip, and runs 95mph and shows their TRUE power.

Mate, you'll be lucky if you have more than 160rwkw.

Oh, and I don't see the mention of a aftermarket ECU \ management... If you don't have that then you certainly don't have anymore than 160rwkw.

When I had a Powerfc, Tune, FMIC, FULL exhaust, boost at 12psi, I was running 200rwkw, and 13's at 105mph...

240rwkw now - 12's at 112mph+........

the mafia,

was actually done by UAS - a well known and good workshop in NSW.

Any questions with your doubts -

Ill get that dyno sheet up and you can speak with the guys at UAS to question their work :)

I also ran just under 100mph last month.

Are you sure he did a 13.7 with just a cat-back exhaust....that sounds a bit surprising to me. But anyway yeah did the car feel like it was pulling any harder at any stage with the boost turned up?

i was there and he did do a 13.7 and he was in the 13's all night

and chubb if i can get a 13.9 at 98mph with 165rwkw im sure ur car juz has a problem. and i know its ur not driving mate u taught me

Edited by burnsie

im suffering a slow launch as to my big fat heavy wheels and not enough torque,arent you running stock 32gtst rims evil weevil?

im not expert but maybe your loosing terminal velocity as you have alot of power but small light wheels,it all depends on your overall wheel diametre,but maybe just the rim itself does come into play,because your

getting great launches,but just not carrying the pulling power the rest of the track.

its just a thought,maybe it could help

Does the car feel slower than it did when it was dyno'd, maybe th efuel pump has died, however the mafia has a good point, 205rwkw with a stock computer?The whole programming of the standard computer is set around making sure the car cant make more power, however i think there is something else wrong.

195rwkw from UAS Adriano - car felt much quicker after the fuel cut defender - was really surprised - felt much quicker than my old Gen3 with more power.

RSTME - yep - stock 32 rims - I know my tyres are almost shot, and wouldnt help me too well!

You might have the curse, check out benm's posts from his GTST days. He has the curse. I think I have it too but a slightly milder dose.

Try 10psi next time because 12 might just be a bit too much for that turbo with your setup. 10psi might get rid of the surge which is definitely slowing you down and showing as low mph.

I had surge on my stock turbo but blew it before I could figure out how to fix it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...