Jump to content
SAU Community

R32 Gtst Type M Highly Moddified

lwboosted
 Share

Recommended Posts

lwboosted Rising Star

lwboosted

Posted
Posted (edited)

Ok its time to sell my car…

It is a HR32 GTST Type M, the car is in excellent condition I have owned it for a year and I am selling it as I want to get a GTR….

The Car makes 198.7 RWKW and a massive 707.7 NM of Torque!!!!! All on only 15psi….

The car currently has the standard turbo and that on because I got defected and so that I can sell it with a roadworthy…

I will either sell the car as is with the standard turbo and that, then sell the TD05/06, exhaust manifold, external wastegate, dump/front/cat, intake pipe, malpassi, oil lines. separately as a complete turbo kit.

Or

Sell the car with everything!!!!!!

List of mods… as the car is today……..

• 3 ½ inch catback exhaust

• Front mount intercooler

• Bosch 040 fuel pump

• SAFC 1 piggyback computer (controls air/fuel)

• Cusco front strut brace

• No name rear strut brace

• G4 fully height and damper adjustable racing coilovers

• 18 inch hp wheel

• RB25 series 2 gearbox conversion (series 2 has better syncros and energizers) “bulletproof”

• Custom tailshaft to suit

• Exedy heavy duty clutch, (5000kms old)

• Shortened gear shifter

• Boost guage

• Shift light

• Eclips headunit

• Kenwood 6x9 speakers

• 1000watt boss audio amp

• mono steer wheel

• gear knob

• GTR front bar

• Cold air intake

• Custom stainless steel airbox

• Maybe a few other bits and pieces I have forgotten about….

Car comes with a RWC

200rwkw 707.7 nm turbo kit (whats not on the car)

• Trust TD05/06 turbo (don’t know the specs rated at 450 hp) has a very large exhaust housing can see in pic

• Turbosmart 45mm pro external wastegate

• Modified exhaust manifold to fit the external wastegate

• Screamer pipe

• 3inch front pipe,

• 3inch cat with pipe welded through

• oil lines

• chrome intake pipe

• malpassi rising rate fuel reg.

with this turbo kit the car is very fast!! And sounds insane!!!! Who ever buys this car will have a lot of fun with the car… the first to see will definitely buy this… this kits bolts straight on and off my car no worries.. anybody could take it on and off in a day… everything lines up 100% I don’t want to separate as this kit has been made for this car tuned and everything!!!

price: $15000 with everything

will separate if needed to sell the car.

Imperfections on the car:

• small dint RH rear guard

• pin dint on LH door as well as a mark from an egg

• LH side skirt is cracked

• Front bar has 2 hair cracks (covered with tape and cant tell

• Minor wear on steer wheel and leather boots of shifter and handbrake

• Very small cigarette burn on driver seat..

• Interior is immaculate all air vents intact!!!!!!!!!!!

• Maybe a couple of other minor things I cant remember…

This car is excellent only serious buyers please!!

Mob: 0409556340

Located: VIC, Frankston South

post-24129-1163825811.jpgpost-24129-1163825902.jpgpost-24129-1163826064.jpg

post-24129-1163826121.jpgpost-24129-1163910158.jpg

Edited by lwboosted
Link to comment
https://www.sau.com.au/forums/topic/143774-r32-gtst-type-m-highly-moddified/
Share on other sites
ardie Experienced

ardie

Posted
Posted

leigh, dammit man! WHYYYY!!! such a nice car. people i can personally vouch for this car. for the conservative state of tune its in, it really does fly. also extremely reliable with no cost spared on modifications. compare the price of this to some of the stockers u find around and the cost of the mods done and this really is a bargain.

  • 2 weeks later...
lwboosted Rising Star

lwboosted

Posted
  • Author
Posted (edited)

Price drop!!!!

everything - $14500

minus turbo kit - $13500

minus turbo & suspension - $12500

minus turbo, suspension & wheels - $11500

note these parts will be replaced with standard items... and this comes with a RWC. REG 11/07

thanks leigh.

Edited by lwboosted
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Yes then it will turn on but I want the car features to work  
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      What about if you just give it direct 12v and earth?
×
×
  • Create New...