Jump to content
SAU Community

Recommended Posts

Nissan has launched its latest-generation Skyline sedan in Japan, and the 350GT (pictured) and 250GT entry-level model provide at least some clues to the keenly anticipated GT-R coupe that will be revealed at next October’s Tokyo motor show.

The new-age Skyline/G35 is an overtly sporting offering and coupe versions (packing next-gen GT-R hardware and serving as test mules for the latter) have been regularly spied pounding around Germany’s hallowed Nurburgring circuit -- the ubiquitous proving ground for performance cars.

The 12th generation of Skyline, the new car features Nissan's latest FR-L platform and newly developed VQ35HR V6 engine. It is both lower and wider than its predecessor and the driving position has been dropped more than 25mm.

While the latest Skyline is unlikely to make it Down Under, the chances are higher for the big-buck GT-R. Indeed, Nissan Australia boss Shinya Hannya has expressed interest in adding the future ‘Godzilla’ to the local line-up.

Hannya and other Nissan sources have also gone on record saying the Infiniti brand could eventually debut Down Under, however, a formal business case has yet to be completed.

Full Source

f**k the Maxima off, and bring in the Skyline. It might actually make me not buy a Chrysler 300C or Subaru Liberty GT if I ever need a four door car, because I'll buy a 380 or a Calais before I buy a Maxima.

Link to comment
https://www.sau.com.au/forums/topic/144493-next-skyline-not-bound-for-aus/
Share on other sites

Theres nothin wrong with a maxima. Have a drive in one and you will find its a more refined and superior car than both the calais and 380 with its silky smooth V6. You cant compare it to a skyline as its targeting a different market. Nissan need to something to fill the huge gap between the pulsar and maxima.

Theres nothin wrong with a maxima. Have a drive in one and you will find its a more refined and superior car than both the calais and 380 with its silky smooth V6. You cant compare it to a skyline as its targeting a different market. Nissan need to something to fill the huge gap between the pulsar and maxima.

There's more to a car than its engine, and for the record I've driven a car with the Maxima's engine quite extensively. Its just not in a Maxima.

And I'd rather get a V8 Calais (or an SS with leather right now, since there's no Calais for the VE yet) if I wanted a sedan with a beefy engine and lacklustre handling.....something that the Maxima is reknown for.

The Maxima and Skyline are both four door V6 sedans of approximately the same size. How are they not targeting the same market in Australia? Nissan wants to put the Maxima up against the Falcodores in Australia, and we all know how well big FWD sedans do against RWD ones.

Theres nothin wrong with a maxima. Have a drive in one and you will find its a more refined and superior car than both the calais and 380 with its silky smooth V6. You cant compare it to a skyline as its targeting a different market. Nissan need to something to fill the huge gap between the pulsar and maxima.

I love my maxima 93, but the new one is really a big piece of soft sponge that has heaps of f$%ked up

torque that has no way of putting it to the ground.

Had one in Queensland up in the mountains for 2 days.......it scared me.

Suspension took off the ground on some parts and there was hardly any feel in the steering wheel...thought I was gone a few times in some places......... :)

The last car Nissan ever designed (without the help of Renault) for Australia was the XTrail ;) .The best thing ...beside the gtr32 they have ever bought into this country,and I am afraid the last decent car we will see from them for a long time.

Just my 2c worth

  • 1 month later...
just think if they brought in some bastardised low spec mutant one no one wants we couldnt bring in real ones from japan

Australia rarely ever gets the low-spec versions of any volume production car. Especially if those low-spec cars have smaller engines. Since our market is very small manufacturers won't be able to import every model, so they just import the best ones.

If you look at the Euro econoboxes that get brought in, none of them have the sub 1.4L engines that the entry models back in Europe have. Because they know no-one in Australia is going to buy a car with an engine that small.

And look at the 350Z - we get the top of the line, and the one below. In the US and Japan there are about 5 variants, the other 3 being even lower equipped than our Touring (no Bose stereo, no LSD, no TCS, cloth trim).

If Nissan Australia were to have brought in the V35 Skyline, they wouldn't have settled for anything less than a 3.5L (probably a cloth trimmed one for an entry model, and the 350GT as a range topper).

I remember that back when Ghosn started with Nissan and killed off the 'enthusiast cars' (a good idea to keep Nissan afloat) that part of his strategy was to not build any JDM-only cars. For instance, each car designed and built would be for every world market and not just Japan...(Kei crap aside).

  • 5 weeks later...
what about our S15 200SX?

There always has to be an exception to the rule :)

Yeah, that is true about the S15. Its the same problem with the DC5 Integras - the Type-R for Australia was the Type-S in Japan.

But, more often than not, we get the top-spec stuff. We don't get the smaller engined cars. We tend to get only the highest trim levels unless the retailer is chasing the low-end price point.

Edited by scathing
There always has to be an exception to the rule :laugh:

Yeah, that is true about the S15. Its the same problem with the DC5 Integras - the Type-R for Australia was the Type-S in Japan.

But, more often than not, we get the top-spec stuff. We don't get the smaller engined cars. We tend to get only the highest trim levels unless the retailer is chasing the low-end price point.

The 350z can come with satnav in the states, we didnt get that.

True.

We don't get the US absolute top-spec model (which came with the RAYS wheels as standard, and their Touring had the cast 18" rims that are on our Track) but, at the same time, all of our 350Zs get the Bose, LSD, leather, etc.

Australia rarely ever gets the low-spec versions of any volume production car. Especially if those low-spec cars have smaller engines. Since our market is very small manufacturers won't be able to import every model, so they just import the best ones.

If you look at the Euro econoboxes that get brought in, none of them have the sub 1.4L engines that the entry models back in Europe have. Because they know no-one in Australia is going to buy a car with an engine that small.

And look at the 350Z - we get the top of the line, and the one below. In the US and Japan there are about 5 variants, the other 3 being even lower equipped than our Touring (no Bose stereo, no LSD, no TCS, cloth trim).

If Nissan Australia were to have brought in the V35 Skyline, they wouldn't have settled for anything less than a 3.5L (probably a cloth trimmed one for an entry model, and the 350GT as a range topper).

hmmm cars sold in jdm at higher spec

s15 silvia/200sx

blubird

pulsar

imprezza wrx

forrester

liberty

mitsubishi lancer , galant

the list goes on and on

Can i add one more?

N13 Nissan EXA... japan got the high compression four wheel disc brake model, we aussies got the 1.6L and 1.8L low compression drum brake model until at least the Series II.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...