Jump to content
SAU Community

Recommended Posts

Hi all,

Jamez previously organised a super sth east car wash successfully.

Well, due to the other day dust rain, my car looks like it has just finish a rally run. Also due to water restriction, i'm going to take my car to the car wash tonight and thought i might invite some of you out for a small car wash meet up :), around 10pm tonight!

The location is Car Lover (I think) on Cheltenham rd near conner of Corrigan rd and Cheltenham rd Keysborough. Though the location is set, i'm willing to change location as long as it suit everyone best.

I'm going to bring my own sponge as i've heard a thing or two about the brush that most car wash places have.

Anyway, its beautiful weather, also i'm going to SAU show and shine tomorrow even though i'm not displaying my car, i'll still wash it and i might win the best present car.........in the parking lot :wave:.

If anyone willing to come and have no idea where this is, give me a yell on 0423856410.

Cheers

West

Link to comment
https://www.sau.com.au/forums/topic/144522-car-wash-toni-sth-east-meet/
Share on other sites

That probably won't be much of a problem, I don't think the Cheltenham police would travel to Keysborough just for kicks.

I live around the area for 15 years now, never had any problems with the local police. Dont' do STUPID thing and you'll be fine or if you do, don't get caught. Show respect and you get respect back.

I've lived locally for about the same amount of time, I've only been pulled over once while coming through the junction for an RBT.

There's too much crime around here for police to waste their time with people in cars ;)

10:00pm?

The wagon needs a wash, if I'm still awake I might come and say Hi.

..and I believe it's called "Parkwash".. not car lovers

That probably won't be much of a problem, I don't think the Cheltenham police would travel to Keysborough just for kicks.

Funny that isnt it....I thought the fact that they patrol that area around keyesy and breiside ....but what would I know....I must be wrong again as SKY-031 said so...

EDIT: and keyesy isnt too far from cheltenham area.... about 10mins, and yes I know that the dandy popo are around that area but their juristiction's meet around there....

but everyone forget what im saying as im wrong as usual sky-031 is right

Edited by Wheezy
what would I know....I must be wrong again as SKY-031 said so...

and keyesy isnt too far from cheltenham area.... about 10mins, and yes I know that the dandy popo are around that area but their juristiction's meet around there....

but everyone forget what im saying as im wrong as usual sky-031 is right

good to see you're finally catching on. :(

Springvale police work the area, as do Dandenong.

Cheltenham Police don't come anywhere near here, it's a different district.

They don't even operate on the same frequency (or at least they didn't pre-digital) so they wouldn't be able to respond to any jobs in the area even if they wanted to.

anyhoo, I didn't make it to the car wash, I was watching Ice Age 2.. :rofl:

I washed the car this morning instead.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...