Jump to content
SAU Community

Recommended Posts

hi guys,

have a problem i am hoping someone can help me with.

the car will stutter ie. revs will stop building just for an instant on full throttle over about 5500rpm all the way to redline. feels like something is momentarily pulling the car back then releasing then pulling back again and again. the problem seems to be worse the colder the surrounding temperatures are for example at night. on a hot day the car will actually rev fine all the way to redline.

the problem isnt AFM, have alredy tried changing them over. car has been rebuilt and run in just recently. it also has new spark plugs and all that jazz. rebuild uses mostly stock items except for a slight overbore requiring larger pistons (larry perkins racing series). also computer has been reset twice now.

any help would be greatly appreciated

thanks

Link to comment
https://www.sau.com.au/forums/topic/145715-32-gtr-stutter/
Share on other sites

forgot to add the car has had a diagnostic done and nothing came up.

incorrect spark plug gap was my first guess too. i dont know what they are gapped to as a workshop did this. i thought they might be too wide but the guys there assured me that wasnt the case.

keep those ideas comin

thanks

Link to comment
https://www.sau.com.au/forums/topic/145715-32-gtr-stutter/#findComment-2722761
Share on other sites

last night i got as far as swapping igniter packs found one of the plugs was very loose however 2day the stutter is back.

when it stutters there is a loud pop from the exhaust. would coil packs produce this? also i thought that if the coil packs were playin up it would affect the car when driving normally not just when at high revs?

anyway if sum1 could clear that up 4 me that would be great

thanks again

Link to comment
https://www.sau.com.au/forums/topic/145715-32-gtr-stutter/#findComment-2725950
Share on other sites

last night i got as far as swapping igniter packs found one of the plugs was very loose however 2day the stutter is back.

when it stutters there is a loud pop from the exhaust. would coil packs produce this? also i thought that if the coil packs were playin up it would affect the car when driving normally not just when at high revs?

anyway if sum1 could clear that up 4 me that would be great

thanks again

The pop is most likely backfiring (ignition of the unburnt fuel in exhaust pipe) from ignition failure in one or more cylinders.

My guess is also on coil packs not providing enough voltage (resistance across the plug gap is greatest under peak load). Try borrowing a good coil for someone and substituting one at a time.

Could also be a cracked insulator on a spark plug or cracked plugs on the coil pack harness. Also check that the harness ground lug is clean, connected properly and grounded tightly.

Link to comment
https://www.sau.com.au/forums/topic/145715-32-gtr-stutter/#findComment-2725999
Share on other sites

hi guys,

it doesnt seem to be my coil packs. swapped them with a freinds ran his in mine and mine in his gtr and both cars ran fine.

a new problem is developing now which i guess is caused by this miss or ignition failure. when idleing the car will suddenly drop revs and sound like it is under heavy labour. when it does this there is heaps of smoke coming from the exhaust which i am gussing is unburnt fuel.

hardest thing is the car wont play up all the time so it is very hard to get my mechanic to look at it.

again any help would be great

Link to comment
https://www.sau.com.au/forums/topic/145715-32-gtr-stutter/#findComment-2739045
Share on other sites

ive got almost exactly the same problem with my suzuki.normal boost is fine.if the car is around85 degrees or higher is fine on high boost but if the temp drops lower on full boost it has a stutter.taking the car to the mechanic this arvo so ill see what he says is wrong with it and let you know

Link to comment
https://www.sau.com.au/forums/topic/145715-32-gtr-stutter/#findComment-2739059
Share on other sites

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...