Jump to content
SAU Community

Recommended Posts

Looks like a bargain.

Well it does have some minor damage and is driven on hard roads so I'd say the suspension is likely stuffed. But for the price I'm thinking fair.

Any hints on items to look for that "state roads p/l" might miss. How can I confirm it is genuine and not stolen etc apart from REVS?

Probably the best bet is to ask for the VIN (if you haven't already got it for the REVS check) and post it in the thread so someone with Nissan FAST can check if it's the real deal.

Also, get a mechanic from an import tuner's to go over it. They'll usually be a bit more thorough than an NRMA check because they'll better know what little things go wrong with these particular cars.

Probably the best bet is to ask for the VIN (if you haven't already got it for the REVS check) and post it in the thread so someone with Nissan FAST can check if it's the real deal.

Also, get a mechanic from an import tuner's to go over it. They'll usually be a bit more thorough than an NRMA check because they'll better know what little things go wrong with these particular cars.

Sound advice.

Asking for check on the VIN in this thread

http://www.skylinesaustralia.com/forums/in...id=2728440&

I choose "state roads" over NRMA as NRMA only offered a local ford dealership as an inspector and they didn't know a thing about skylines. I considermyself a bit nieve but this chick had no idea, total sales person. But at least she spoke english unlike the mechanic. Paying an extra $200 for the fellow to travel there and back so unlikely I'd get anyone from a import tuner to attend not being their job.

I wonder how come and it has so many k's? Usually GTR's only have 30k k's this one must have done 100k k's here . Looks clean in the pics and priced to sell . I wonder what he means by private import, does he mean personal import ? Maybe he just says that because it came to Australia second hand ?

I wonder how come and it has so many k's? Usually GTR's only have 30k k's this one must have done 100k k's here .

Probably because it's genuine km. Used as a regular car. Original dash (shame, nismo would have been nice). Only ever seen one GTR with less than 30K and that was due to a dash replacement.

Probably because it's genuine km. Used as a regular car. Original dash (shame, nismo would have been nice). Only ever seen one GTR with less than 30K and that was due to a dash replacement.

I bet when it came to Australia only had 30-40k k's ......somehow they all loose k's from the time they leave Japan until they are registered ..... i have seen it plenty of times, example a car is sold at auction in Japan with 120k k's by the time it gets here it only has 40k k's ..

Sound advice.

Asking for check on the VIN in this thread

http://www.skylinesaustralia.com/forums/in...id=2728440&

I choose "state roads" over NRMA as NRMA only offered a local ford dealership as an inspector and they didn't know a thing about skylines. I considermyself a bit nieve but this chick had no idea, total sales person. But at least she spoke english unlike the mechanic. Paying an extra $200 for the fellow to travel there and back so unlikely I'd get anyone from a import tuner to attend not being their job.

6T91MPAAATYDBJ003 is not a VIN number. It's a model code.

A VIN number for an R33 GTR will be BCNR33 xxxxxx

6T91MPAAATYDBJ003 is not a VIN number. It's a model code.

A VIN number for an R33 GTR will be BCNR33 xxxxxx

I wonder how come most people don't know where the vin is. You will always find it on the firewall and you want the Nissan number not the one they stick on here at compliance .

Here is an example :

post-5240-1165322638.jpg

Edited by wrxhoon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...