Jump to content
SAU Community

Recommended Posts

So i scored myself a screw in my semi's lastnite.

and went to put on my space saver. which leads to a shit sound and slight jerky driving. i take it off after about 10km to next servo where i buy that foam crap. which in the end doesnt work too well as i have more problem than just a screw, i couldnt put space saver on front as i thought it would cause similar problem to front diff

question bieng would have i scored any damage to diff? i thought it would be better to f**k a rear diff than the front. if it was to happen!

Link to comment
https://www.sau.com.au/forums/topic/146416-space-saver-tyres/
Share on other sites

isnt it better to slap it on the rear of a 4wd car rather than the front?

One of the guys in Adelaide i think shagged a front diff doing this...

thats what i did. put it on the rear.

tho now thinking about it all.

i probably could have put it on the front and removed the fuse for the attessa system

yes, that is what I would do. but in reality it's never going to be good no matter where you put it.

that foam shit is a very bad idea. it can clog and destroy your valve, and it can be a bitch to clean off everything. and to top it off it doesn't always work.

i don't think you would have busted the diff by just driving 10 km. I'd imagine that since you noticed it driving weird, you would have been going slow? If so, the diff would probably be ok (since it tries to match speeds of the wheels, if 1 wheel is going 30km/h, and the other is going 29, that's not as bad as one going 150 and the other going 130).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...