Jump to content
SAU Community

Recommended Posts

Now is it true that triptonic skylines are slow?

I dont believe it

Slow at what? Gear changes? The upshift on the 34's about .5-1second, the downshift's pretty quick also. But a MV Auto shift kit would do wonders to the tiptronic box.

If you're wondering what's achievable.. with shift's check out video's alexcim's posted.

http://www.skylinesaustralia.com/forums/in...t&p=2719382

Now tell me that's slow.

But if you mean tiptronic line's are slower in terms of getting power to the ground.. the general power loss is around 8-10rwkw going for the auto.

the tiptronic is still an auto box, meaning greater power loss, and shifts that are similar to a manual (maybe a just a bit quicker/slower whatever, but not much in it), so in stock form i'd imagine it would be slower down the quater or on a track...

if the auto was properly built, then it would absolutely destroy the manual for quater mile performance

Straight line there ain't much between it (8-10rwkw drivetrain loss ain't too bad)... around the bendy bits.. well we've all seen enough video clips to know the auto (even in tiptronic form) doesn't cut in there.

Check out the number of quick drag nissans there with auto boxes.. some australia's fastests drag 300zx's and 200sx's are autos. Same can probably be said about skylines.

Where you hit a limiting factor is in tuning options for auto boxes... not all aftermarket ecu manufacturers support tiptronics (e.g. PowerFC). So guess you'll have deal with that when you start making some serious power.

Edited by Howie

My R34 is Tiptronic and I only drive it in tiptronic mode, not as fun or controllable as a manual but better than auto. Who else has been in auto mode and thought they were in tiptronic mode shifting up to neutral only to hear that horrible free rev and think they have broken the auto, then embarrassingly realise what you have done :D

LOL i've done that once. I'm with you, for normal driving i always leave it in tiptronic and change through the steering wheel - it's just nicer to be in control most of the time.

My R34 is Tiptronic and I only drive it in tiptronic mode, not as fun or controllable as a manual but better than auto. Who else has been in auto mode and thought they were in tiptronic mode shifting up to neutral only to hear that horrible free rev and think they have broken the auto, then embarrassingly realise what you have done :)

I always drive my 34 in Tiptronic mode. and YES have accidently shifted to Neutral when in normal... its not a good feeling is it.. but overall its not too bad... I have heard all about MV being able to work wonders on the boxes... I love it when your stuck in peak hour traffic.. just shift it to auto mode...

tip isn't that shit...auto isn't as shit as every1 reckons...I have both and they both have their advantages.

I gotta say I love to drive the tip after driving back in peak hour with my twin plate...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...