Jump to content
SAU Community

Recommended Posts

hi guys ive bought a greddy plenum from a[ trusted] seller....no not ebay either

and ive been told its a fake

how do i tell if it is the real item there is no stamping on the plenum of any sort and im just trying to find out how i can decifer an orige from a fake?

Link to comment
https://www.sau.com.au/forums/topic/148152-greddy-plenum-question/
Share on other sites

somone must know something about the plenum that decifers it from the fakes

and yes glenn ive seen the gtr ones and they are stamped but the rb25 ones are quit difrent

Edited by spirosky33

PICS tell a thousand words.....who sold it to you?

If its a trust one it should have come with a red greddy sticker, and the plastic packaging inside the box should have blue trust / greddy writing on it, forget what it says

id rather not say who sold it to me

it wouldnt be fair and its against forum rules as im pretty sure it is the real deal it came with the box and red sticker too but id like to prove somone wrong also with proof that it is the real deal

so what your saying is that there is no greddy marked on the plenum.....

Ok, so the kit come with a packet full of bits and pieces of vacume line stuff IIRC, and you would of needed a TB adapter unless you are using a Q45, the adapter comes in a small box with greddy / trust all over its plastic packaging too....

and the stuff filling the rest of the box is that annoying polystyrene stuff.....it was a funny colour IIRC, blue or something (yeah blue semi circlies Im sure of it)......if thats how yours has come its genuine

You should be able to pic the cheap fake from the actual Greddy product a mile away. The copy Greddy intake plenums have a terrible terrible finish.

If your was genuine it should have included Greddy documentation in the box to certify its authenticity and should have included the red Greddy badge as mentioned that is usually attached to the top of the plenum itself after you fit it.

Mine came in a TRUST box, all the vacuum lines have TRUST printed on them, all documentation is PLASTERED with TRUST/GReddy, there is a GReddy badge which sticks on, the TB adaptor has GReddy embossed on it..

I got it from nengun, no probs there.. however 6 months later autobarn sell them for the same price it cost me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
    • Damn you’ve done well, definitely snapping necks.
    • Great weekend and event. Open fire at the caravan park, perfect weather all day and a great feed and a couple of drinks at at awesome country pub.
×
×
  • Create New...