Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering, if anybody here had got this done on their car before? I'm looking at getting it done on my R33 GTS-T - it currently has the standard auto gearbox in it, with a shiftkit installed - its fun to drive at the moment, but I think I'd prefer to have a manual instead.

I've looked around for a bit but I can't find many reccomendations or places in QLD listed here who would be able to do one - does anybody have any ideas of who I could call up to get an idea of cost/time etc?

Cheers!

Phil

Link to comment
https://www.sau.com.au/forums/topic/149111-auto-to-manual-conversion/
Share on other sites

Pretty much any import garage will do the conversion i think. Just ring around.

I'd assume the auto with shift kit would be faster than a manual (with the same mods).

I'd recommend driving a manual R33 like yours, just to make sure you prefer it over the auto - Before anything else.

Definately ring around and get quotes. You can save plenty of money just by shopping around.

Good luck!

I have done a auto manual conversion before and I swore to myself that I would never do it again...

I mean the hassel involved is huge... In many cases its easier to just buy a manual...

Is the car worth allot to you??? I mean is it any thing special in terms of paint or non-removable modifications???

Oh i do encourage anyone to modify their car and dont get me wrong, I would do it again if it made sence to do so...

Im just asking if its not too late to just buy a manual R33???

Dont forget going from auto to manual you need an LB3 modification plate from QLD transport dept and your insurance will be higher than a factory manual...

' date='29 Dec 2006, 07:33 PM' post='2781674']

Pretty much any import garage will do the conversion i think. Just ring around.

I'd assume the auto with shift kit would be faster than a manual (with the same mods).

I'd recommend driving a manual R33 like yours, just to make sure you prefer it over the auto - Before anything else.

Definately ring around and get quotes. You can save plenty of money just by shopping around.

Good luck!

Hey mate,

Ahh fair enough, I'll give a few a call in the next few days.

The shift kit really does add an extra element I guess - in a straight line (drags, whatever else) yeah I'll beat a lot of stuff, but put in on a circuit (like I want to do a lot more of next year) and its harder - little to no control over the gears, I can't really use engine braking much etc.

I've driven a friends R32 with 200rwkw and another mates R32 with around 160rwkw and I've found them both very enjoyable, and a lot quicker than my car.

I have done a auto manual conversion before and I swore to myself that I would never do it again...

I mean the hassel involved is huge... In many cases its easier to just buy a manual...

Is the car worth allot to you??? I mean is it any thing special in terms of paint or non-removable modifications???

I realise there will probably be a fair bit of drama involved, and cost - but I figured I'd check it out first before making my mind up completely.

To be honest, I thought about selling the car and buying a new one, but the market seems to have fallen out of the r33's in recent (and no so recent) times. For me to be able to do this normally, I need around $13k for my current car, which I have had it advertised recently and recieved 0 phonecalls/enquiries about it, and I see a lot of similar R33's which are younger and have more features, for cheaper - eg $11k ish sort of price range.

I'm pretty happy with the R33 at the moment, its a fun car, clean and straight, so I figured I'd keep it as is. I didn't realise about the mod plate thing though, and insurance, I'll check that out as well before I procede with anything.

Thanks again guys - if anybody has any reccomendations for people I can call apart from the well known ones (Mercury, Allstar, etc, I'll call them as a given) please let me know!

Cheers

To be honest, I thought about selling the car and buying a new one, but the market seems to have fallen out of the r33's in recent (and no so recent) times.

Yeap totally with you... I was going to invest in another GTR...

But it would be a waste of money... With that money im spending it on the GTS-T instead...

I have got to a point where my car has cost me double what i coudl sell it for, so i may as well just run it into the ground... I mean I do 2500kms per annum and its pretty much all on the track...

hi phil

ive had a few mates get their cars converted from auto to manual and they werent overly happy with it (just small niggling problems, they also had other work done at the same time (engine swaps))

i guess u have to decide if your car is worth spending that extra cash on

u'll never ever see it again, and imo an auto converted to manual is worth even less than either an original auto or manual . .. . .

id probably stick with the auto

drive it for a few more years until you can afford to get rid of of it for whatever u can get for it and next time buy a manual

love spook

Edited by Spook's_Skyline

I looked into it and priced up everything, I found it was going to cost about $4000 to $5000 depending on the clutch you wanted to get. So I decided to keep the auto.

You will need the following;

Gearbox

Gearbox crossmember

Tailshaft

pedal assembley

clutch master cylinder

clutch slave cylinder

clutch

flywheel

bell housing

center console

dash cluster

computer

some fluid lines

manual spigot bush

And there are a few things I am sure I have missed.

Really in the long run it would be best to keep it an Auto and maybe get the auto box rebuilt and it will be lots tougher.

just a thought.

Chris

i did a little research back in the day when i was looking to buy a skyline and was faced with the possibility of having an auto

as far as i figured it wasn't THAT much of a hassle, though there could be a couple minor technical bits that i wouldn't know about anyway

but 5k ? surely thats a wee bit on the pessimistic side?

When I looked into it I was looking $3000 for a gearbox with warranty, about $1000 for clutch and master and slave cylinders and then about $1000 for all the extra bits including labour. That was 18 months ago.

That was a fair price at the time.

When I looked into it I was looking $3000 for a gearbox with warranty, about $1000 for clutch and master and slave cylinders and then about $1000 for all the extra bits including labour. That was 18 months ago.

That was a fair price at the time.

Im not sure who gave you those prices but they are WAYYYYYYYY too expensive

tentative quotes from people who knew their stuff was around the 2-2.5k mark to convert a 34

bit cheaper if you hocked your old transmission

in the end? probably is a hassle, as is a fair bit of car tinkering, just pay someone else to do it

Honest to god prices would say a r33 rb25det 5 speed is worth $1500 second hand any day of the week, with some sort of warranty. Allow at leat another 1.5k for stuff as mentioned like pedal box and lines, clutch and flywheel, new flywheel nuts, gear box crossmember, tail shaft (or modify exsisting, around $350 mark last time ive done it) manual shifter surround, gear knob, and then labour to fit, dont forget reverse and neutral switch wiring, and thats for the standard gear. if you want a decent clutch and flywheel, id say costs would be around $4500- 6000 depending on clutch and how complete the conversion kit you get is.

Ive always found cars converted from manual seem to be better cars, maybe because they have had a easier life and bought by a different type of owner from new. Both my S13 were autos converted, were at the time a lot tidier than others that i looked at.

Ive always found cars converted from manual seem to be better cars, maybe because they have had a easier life and bought by a different type of owner from new

Why I imported an auto and then converted it..

I converted my r32 to manual.. and it isn't very hard once you have th parts.. in fact it's all very much plug and play as long as you know how your car is screwed together. You also have the opportunity to install new and/or performance bits rather than standard (new m/s cylinders, braided clutch line, lightened flywheel) so if you do it properly it should behave as well as any factory manual, and then some. Unfortunately the hardest part is just getting a decent box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...