Jump to content
SAU Community

Kws At The Wheels  

219 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

yep what a day, worked out in the end

Full boost before was at 4250rpm, think it is the same still , don't know to busy watching

the road:)

I can get 20+psi on just a footbrake if i want, no point though, anymore than 3200rpm

and 3 psi and it digs a hole on mt drag radials

  • Replies 152
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yep what a day, worked out in the end

Full boost before was at 4250rpm, think it is the same still , don't know to busy watching

the road:)

I can get 20+psi on just a footbrake if i want, no point though, anymore than 3200rpm

and 3 psi and it digs a hole on mt drag radials

Darren, How much of an exhaust and what size you running?

Daz, tell the real story. It was 471.3rwkw - that point 3 can make a big difference :rofl:

Three 450-470+rwkw runs, back-to-back and in 40+'c heat. Impressive stuff.

Edited by whatsisname

4 inch dump, 3 inch exhaust full length of the car, 1 big muffler

and a little muffler at the back, i have no intention on ever using no

exhaust and race fuel..its a street car, and a challenge.

first pull was 460, then 1 or 2 degrees of timing 471, was there a 450?

can't remember

cheers

darren

Edited by S3_Girl

hey just like to update me kw output lol

well ive had my car tuned with the powere fc logit the other night and am running 1.3 bar std turbos

starting to make boost at 1900 rpm and full boost by about 3300 rpm and comes on pretty hard for std

the power fc logit is the way to go for sure i have no knock and and pulls hard all the way to 8000

prolly around 280 to 290 + easy

see how long b4 i need new turbo's

mike

So a guy is sellin his S15 and uses my dyno chart as proof of the power...

http://forum.silviansw.com/viewtopic.php?t=26296

Damn funny read.... :):D:O

Becareful guys!! Who woulda thought this shit would happen!

So a guy is sellin his S15 and uses my dyno chart as proof of the power...

http://forum.silviansw.com/viewtopic.php?t=26296

Damn funny read.... :):D:O

Becareful guys!! Who woulda thought this shit would happen!

:laughing-smiley-014: the dumbass [insert OWNED!! image here] :laughing-smiley-014:

If he was a little smarter he could of at least photochopped it - Hi Tech Dyno, file name, power figure etc.

Nice one Busky2k.

4 inch dump, 3 inch exhaust full length of the car, 1 big muffler

and a little muffler at the back, i have no intention on ever using no

exhaust and race fuel..its a street car, and a challenge.

first pull was 460, then 1 or 2 degrees of timing 471, was there a 450?

can't remember

cheers

darren

Darren, Troy just told me the other day you have only just changes the stock brakes to 33 ones, WOW how did it used to pull up?? Ok?? Must be alot better now with that much power and now brakes you can trust...... :D

So a guy is sellin his S15 and uses my dyno chart as proof of the power...

http://forum.silviansw.com/viewtopic.php?t=26296

Damn funny read.... :nyaanyaa::nyaanyaa::laugh:

Becareful guys!! Who woulda thought this shit would happen!

damn

you should reply the thread...to protect the buyers imo

nice find tho'

your car back yet andy?

nah paul...dropping it in today, if the clutch arrives

got held at customs for 7 days now (and $500 for duty + gst)

to "protect" the local business...but the thing is, nismo clutch can only be bought oversea, not made locally :nyaanyaa:

way to make money

ok time for ppls thoughts

a mate of mine his R34 made 147RWKW @ the last dyno day and that was running stock boost

he has since got another tunner to put a boost controller on just the bleed type and a fuel cut defender and now hes making 204RWKW from a NEO ive spoken to a couple of others and i really didnt think just winding boost up to 14psi on a neo would get you over 200kw

anyone elses thoughts on these NEO engines

Its around the mark considering its running the fcd. BUT 14psi is iffy on the R34 turbo.

Generally 11psi ish makes that sort of power (maybe a touch more as the R34 turbo's ted to push 10-15rwkw more than the rb25det turbo's so 210-215rwkw) when ign and fueling is optimal (ecu).

ok time for ppls thoughts

a mate of mine his R34 made 147RWKW @ the last dyno day and that was running stock boost

he has since got another tunner to put a boost controller on just the bleed type and a fuel cut defender and now hes making 204RWKW from a NEO ive spoken to a couple of others and i really didnt think just winding boost up to 14psi on a neo would get you over 200kw

anyone elses thoughts on these NEO engines

Hey Madaz

Yeah sounds right. I'd say though between 12 and 14psi he would have about half a kw difference! So he should probably put the boost down a little before things go bang.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...