Jump to content
SAU Community

Recommended Posts

looking for comments from anyone using acl forgys! just want to make sure i get something that i dont regret buying! setup will be in the well over 500hp area! also rb30 conrods is it worth looking into the forgyed ones that japanesegarage sells for $650 or should i stick with stock(crank will be getting a hell of a lot spent on it)? last thing i need is another conrod letting go and distroying another motor! will also be running acl race series bearings looking for comments on them to!

thanks vance

Link to comment
https://www.sau.com.au/forums/topic/150459-acl-forged-piston-comments/
Share on other sites

looking for comments from anyone using acl forgys! just want to make sure i get something that i dont regret buying! setup will be in the well over 500hp area! also rb30 conrods is it worth looking into the forgyed ones that japanesegarage sells for $650 or should i stick with stock(crank will be getting a hell of a lot spent on it)? last thing i need is another conrod letting go and distroying another motor! will also be running acl race series bearings looking for comments on them to!

thanks vance

My r33 was rebuilt with ACL forged pistons. I cant complain yet as they havent given me any grief.

They are a good price from what i understant bu ti think you can maybe get CP or arial pistons for not much more. But hten i dont know if those piston are really any better????

may i ask what acl forged pistons you are going to use?

I wasnt aware that they made non turbo rb30 pistons in the forged acl variety. I know they make rb30et ones, however the cr with those would be upto buggery.

ive searched with lots of depth re a piston to suit a rb30det and ACL simply dont make them. the rb30et piston compression will be far to low so be of much use and the only other acl option is 6mkry2799 which is a stock piston with chromoly ring

Acl forged pistons are good quality :whistling:

japanesegarage rods on the other hand.....

I bought a set for an RB30, Took at least 3 moths to arrive and they look rough as.

They cost just over $1k, they advertise they cost $650 - that is for the 4cyl rods though.

Acl forged pistons are good quality :)

japanesegarage rods on the other hand.....

I bought a set for an RB30, Took at least 3 moths to arrive and they look rough as.

They cost just over $1k, they advertise they cost $650 - that is for the 4cyl rods though.

I here you with Japanese Garage,not only is their advertising misleading,but their service is disgraceful! :huh:

I just the ACL Race series pistons in my car for the RB30DET with 25 head and they are good. they are acually a MAHLE piston imported from the usa by ACL because it costs too much to make forgies in australia. I think MAHLE are the same brand as ROSS ?

my compression test came up at 120 in all cyl so its a little lower then before but good for high boost =)

i used the precision motorsport conrods in my engine as well which they all come out of the same factory in china (scat eagle rah rah) they do well for what they are (can handle 700rwhp) without any issues

url for my conrods

http://www.tweakit.net/shop/product_info.p...roducts_id=5878

Precision H-Beam Forged Rods - Nissan Skyline RB30/ Holden VL Commodore (set of 6) $1,150.00AUD (inc GST)

$1,045.45AUD(ex GST)

$1,020.00AUD (inc GST)

$927.27AUD(ex GST)

Forged Conrods are a must for a bullet proof rebuild on your turbocharged engine. This allows the stress to be taken off the bottom end under high rpm and high boost. Of course forged pistons are not essential, but are highly recomended.

Precision Motorsport rods are manufactured from certified 4340 steel, vacuum degassed to remove impurities, and multistage heat treated. Each forging is X-rayed, and shot peened to relieve stress, and all surfaces are 100% machined.

H-Beam Connecting Rods Feature:

NEW 4340 Certified Forged Steel Rod

ARP 5/16 2000 capscrew bolts standard

Silcone Bronze bushings for floating pins

Precision alignment sleeves positively locate the rod cap, eliminating cap walk

Packaged in weight matched sets end to end +/- 1 gram

Rated for upto 750 horsepower (Same as the limit of the factory RB30 Crankshaft)

Edited by Guilt-Toy

The ACL piston is a 8.5:1 not like the OEM piston in the RB30ET - so they actually work ok with the RB25 head. As they come in around ( cant remember exactly ) 8.0:1, and with a slight surface you can bumo it up a little. As Im using the R34 GTT head mine came in at 8.4:1 as they have a smaller combustion chamber than the R33 head.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...