Jump to content
SAU Community

Recommended Posts

yeah we had an average day.

Our gearbox broke in Mole Creek just before lunch, only have 3/4 and 5 left. We decided to retire since we have run out of "Request to Restart" forms.

Mark and Scott had a small off. Which in turn led to the car kinda tipping off the road and rolling 5 times down into the gully. They are both fine but the car is a little second hand.

Which I guess closes our Targa Adventure for this year.

  • Replies 380
  • Created
  • Last Reply

Top Posters In This Topic

Hay mate, i know it's a bit bad for me to say this, but i am glad somone oles had some bad luck. LOL.

Nah just kidding mate, looks like targa bit hard this year, we all managed to fall of the road. I will post pics of the hinter on monday when we gat it back from Bischino.

Better luck next year for all those who are attending.

Woooooooo 50 second lead over Richards.

He's out there doing it for all the privateers, proveing that a car build yourself and driving talent can beet all the professionals.

First time back since winning in 2004 and hopefully his return will reward him with another victory.

And yes looks like Sullens still holds a 54 sec gap to Richards, how is it possible that car can be so good?

I've seen stages of the build up at his house, and i could see how confident he was with this car, over any previous car he build himself. The car still has so much more potential from us as tuners perspective, running stand turbo and pretty sure exhaust. I'm not 100% but he was saying the car could be lighter but, had to keep it to a certain wait due to rules.

I think it all comes down to driver, the car is very good =) but after watching Tony in NSW ralley events his driving is really on a level above his competers, considering he's a "privateer" and raced his own cars as a hoby.

He give people out there the realisation that you don't have to be a "professionaly" driver with an expensive top of the range, newest car to win. He is... a true car enthusiest.

Good luck to him, hopefully he wins again, he deserves it.

Edited by Michael_1882

BTW a joke we made up today...

whats Red and Black and Green all over?

an EB falcon with a green gtr parked on its roof in a dam.

So that's two down this year. But I think all the other skylines survived

Well I finally made it home after all the issues we had - Everyone is in one peice which is the main thing - Marks car is dead as a door nail.

Had lots of fun though

Those pics of marks car and the drop dont do it justice.

Hey Duncan - I missed that joke about the green skyline ahhahhaah

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...