Jump to content
SAU Community

Recommended Posts

Steve at manta racing[ richmond ]. He 's booked out for the next 2 week's though. He will more than likely do it at willall racing's dyno with peter hall :(

Manta racing I believe don't have their own dyno. They send the cars over to 'I believe' Willall Racing.

Personally I believe its an added liability having your car driven to and from a workshop for a tune.

Please do correct me if I am wrong as I may very well be. :)

But either way my vote goes to Shaun @ Boostworx. My loyalty has always been with Shaun and in return he looks after myself and doesn't charge the earth.

He's a top bloke thats down to earth and not full of him self.

Northern side of town. I would have to say Tilbrooks, BUT I would only have Tim Possingham (if he's still there) tune mine.

They do charge quite a bit more; DO make sure you get a solid written quote and make it very clear they are to call before performing any work that will blow out the price.

Both Tilbrooks and Boostworx have the Datalogit so there's no issues there.

Another bloke that appears to be on the pulse is Graham West Performance Marion Road. They too have a datalogit.

Got a quote to retune the Stagea awd rb25det auto with the highflow turbo, for the safc II and the sitc piggybacks.

Has been tuned twice before at Graham Wests - Im sure now that I definately paid for too much time (lol at 5hrs dyno time plus setup fee).

Got quote from Wests, then got quote from John at HiTech Dyno. HiTech were under by well over a hundred dollars, including dropping the driveshaft for the rwd dyno (Wests have a 4wd dyno), so thats where I'll be going soon for the final tune. Steve (Pixl8r) reports a good experience with HiTech hence my decision to get a quote from them.

hmmmmmm, perhaps I should get a quote from Boostworx ? :huh:

If your running an SAFC I would think 1-2hrs absolute max.

So the tune shouldn't cost much more than $250.

Exactly, as I NOW know. Didnt know any better one year ago - hence why I never queried the 5hours charge time from GWW. Still not happy about the overcharge although the tune wasnt toooo bad. Meh.

Quote from John at Hitech was for a max of 3hr tune, said he'd do it quicker then that tho; seems honest enough to me.

Exactly, as I NOW know. Didnt know any better one year ago - hence why I never queried the 5hours charge time from GWW. Still not happy about the overcharge although the tune wasnt toooo bad. Meh.

Quote from John at Hitech was for a max of 3hr tune, said he'd do it quicker then that tho; seems honest enough to me.

you dont need anything fancy to tune ya glorified volvo . bring it around here with a bottle of scotch we can drink the scotch then get started on ya car with my big hammer and blunt screwdriver lol

ps this is dean didnt know i was logged in under sons name lol

Edited by iLEC

well id say either John Keen at High Tech

or go to see martin donnon down at wingfield at there new shed and dyno

i think they are called willall

for power fc tuning and the datalogic stuff like tuning with a laptop id see donnon

stuff tuning with a hand controlled its old skool lol

mike

I heard New Years that Tilbrooks were closing down, anyone else heard anything on that?

Just spoke to Mark and he said he is still there but wont be back until after the 26th of january I think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...