Jump to content
SAU Community

Recommended Posts

actually I wouldn't mind finding my fence lines, and key levels :thumbsup:

Can't imagine it would be fun to do a 1300spm sloping block though.

eep upwey! last job i did there it nearly drove me insane! took 2 day and the block had a height different from top to bottom of about 16 meters on a kinda standard 800spm block :S might be a bit much for a weekend job lol

  • 2 weeks later...
  • Replies 362
  • Created
  • Last Reply

Top Posters In This Topic

eep upwey! last job i did there it nearly drove me insane! took 2 day and the block had a height different from top to bottom of about 16 meters on a kinda standard 800spm block :S might be a bit much for a weekend job lol

Hehe, did say it wouldn't be fun :( It's only about 20m rise over 60m length :thumbsup: Need to figure where and how big my garage can be :D

im a network engineer and Rigger. :action-smiley-069:

Intersting combination!

I work at cadbury :P

On the upside i get cheap chocolate and a good pay rate. Worst job in the world though

I was a network engineer/PM at Cadbury for aboput 5 years. I wonder if the crew is still the same out at Ringwood/St Kilda.

That happens at Schweppes in Tullamarine. The company I work for is contracted to do a bit of electrical work there.

It's funny though, all depends which security guard you get at the gate. Some just glance in the back of the van, while others will want to see inside your toolbox :(

They always used to do it at Ringwood too :rofl: We had em sorted though ;)

Health, Safety and Environmental Consultant :action-smiley-069:.

At the moment i'm working almost exclusively with hazardous materials.. in particular Asbestos. If you have any questions about hazardous materials (particularly at your work place) fire me a PM :P. Love my job. Before this job I was running the Parkdale Bottleshop.

Health, Safety and Environmental Consultant :D .

At the moment i'm working almost exclusively with hazardous materials.. in particular Asbestos. If you have any questions about hazardous materials (particularly at your work place) fire me a PM ;) . Love my job. Before this job I was running the Parkdale Bottleshop.

what happens if i grind up asbestos and snort it thru a pink straw.

what happens if i grind up asbestos and snort it thru a pink straw.

You will be fine until about 20 years later when you will 5-10% more likely to develop cancer and in particular Mesothelioma or cancer of the lining of the lung which is at this stage completely incurable and see you essentially drown to death in your own lung juice in a year or two. Alternatively you will be fine. So ya.. about the same as if you smoked a few cigarettes really :thumbsup:.

My occupation is packer at Coles, yes it's a rubbish job but it pays.

Would love to work more hours than what I'm currently working.

There are some interesting jobs out there.

Asbestos is harmless if swallowed. It is only the respiratory system which is affected.

And yes Asbestos could be substituted for smoking, i'm not sure it would provide quite the same feeling though :P but the hazard is about the same!

Asbestos is harmless if swallowed. It is only the respiratory system which is affected.

And yes Asbestos could be substituted for smoking, i'm not sure it would provide quite the same feeling though :P but the hazard is about the same!

i see. because my school, Lakeside Secondary College in the northern suburbs is full of the shit. its kinda scarey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...