Jump to content
SAU Community

Recommended Posts

Some good tips here. I'd love a 400D myself but cant afford it quite yet so I have no choice but photoshop hehe

I have the same problem with my cam too where it overexposes shiny white things. To fix it, I'd shoot white cars a bit underexposed and use photoshop's shadow/highlights and levels tools.

If you shoot the car overexposed its really hard to get detail back in photoshop so underexposing is the way

  • 2 weeks later...

Looks to me like the camera is metering the average for the whole frame, as the rest of your shot is perfectly exposed. but the white car is slightly overexposed (washed out, lack of detail).

Not sure on the specs of you camera, but if you could change the way it meters that would be a good way to go (centre weighted, with the car in the centre of frame). Actually, have just read the specs you posted, and it seems it does Ealuative, Centre Weighted and Spot. Try the Centre Weighted, and even a couple of shots with Spot (though this really will meter according to one spot, and ignore the rest of the frame, so could be very hit and miss). Of course you'll have to keep the car in the centre, then just crop differently for different placements.

Other than that, Genghis has a good idea with under exposing, then using Levels in photoshop (or masking off the car in seperate layer and adjusting just the levels of the car so that the background stays correctly exposed). I se from the specs that your camera can do -2 stops in 1/3 increments. Play around with -1/3, -2/3 and -1 stop (1 stop equals half the amount of light getting to the sensor).

Bsically try a few shots with each method, and a few combining them, then see which comes up best. The Exif info stored with the picture should tell you what exposure setting you were on, and maybe even what metering method. The software that came with the camera should be able to show that info.

Looks to me like the camera is metering the average for the whole frame, as the rest of your shot is perfectly exposed. but the white car is slightly overexposed (washed out, lack of detail).

Not sure on the specs of you camera, but if you could change the way it meters that would be a good way to go (centre weighted, with the car in the centre of frame). Actually, have just read the specs you posted, and it seems it does Ealuative, Centre Weighted and Spot. Try the Centre Weighted, and even a couple of shots with Spot (though this really will meter according to one spot, and ignore the rest of the frame, so could be very hit and miss). Of course you'll have to keep the car in the centre, then just crop differently for different placements.

Other than that, Genghis has a good idea with under exposing, then using Levels in photoshop (or masking off the car in seperate layer and adjusting just the levels of the car so that the background stays correctly exposed). I se from the specs that your camera can do -2 stops in 1/3 increments. Play around with -1/3, -2/3 and -1 stop (1 stop equals half the amount of light getting to the sensor).

Bsically try a few shots with each method, and a few combining them, then see which comes up best. The Exif info stored with the picture should tell you what exposure setting you were on, and maybe even what metering method. The software that came with the camera should be able to show that info.

Thanks for the info. The inherent problem is that you basically need to have the camera set up before the car hoves into view. So I guess if I use the ISO settings available & then go from there. Will play around with the exposure also.

I'm not sure how much of a difference the ISO setting will make, that may just adjust the shutter speed required for a given aperture (the sensitivity, also how much noise you end up with). The camera will still try to meter (expose) for the whole scene, that's why I reckon try centre weighted metering, that way it may help with white cars, and also with black as it will be concentrating on the car. If try to underexpose all the time, dark cars won't come out so well, so I guess you'll just have to find a good mid point that works well enough most of the time (unless it's really quick to change stuff).

Anyway, good luck, and if you find a set up that works post it up here and we can all learn what works in case we come across a similar problem.

  • 2 weeks later...

Seeing as how the 400D is the camera of choice, does anyone know where to get one on special or know of a good place to buy them?

Have used www.digitalcamerawarehouse.com.au before and found them good, they list 400D for $1,178.00, any better prices or deals out there? No point paying more than I have too.

Haven't used before but

http://www.camerasdirect.com.au list the 400D for $1099. Might pop in and check out the store as it is in Brisbane and pick up is fine.

Oh, reason I am looking at just the camera body and not the whole lens kit as well is I have normal/old Canon Eos camera already and the lenses will work fine (apparently)?

Edited by wannabeslida

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...