Jump to content
SAU Community

Recommended Posts

spewin i didnt know that was illegal

Yeah I didn't know either. Seen heaps of Porsches and so on driving round with them, bet they wouldn't get any hassles from the cops. Was pretty lucky though didn't get stikcered for my carbon fibre bonnet.

  • Replies 169
  • Created
  • Last Reply

Top Posters In This Topic

I was one of the lucky ones, waited till about 12 30. The cop that came up to me was nice natured had a little chat while he was checking over the car. Held my breath when he was looking under the bonnent, high mount turbo, ssqv bov, still holding my breath, had a quick tug at the pod filter. Asked to see my battery in the boot, then just said i should raise the suspension at the back, was having a look at the 4inch cannon at the back and said i could go. Then i took a deep breath and was on my way. Dont know what i was worried about. All we have to do now is wait for how big the news will play it.

got to say, that with a cruise that big, it was probably going to be 'police escorted' just like the toy runs are these days, due to the large amount of bikes...but ruined by a select few.

Think I'm going to stick to the SAUWA members only cruises :D

I was there.. Was very Entertaining... to watch.. wasn't sure what 2 expect but that was a lot of people. It got out of hand Later on n stuff started Happening...

Was Insanee..............

Still had my Setup from the Drag so it looked Hardcore with Hardly any Seats beside mine in the Car.. so Instant Yellow...

It's on Channel 7 Tonite 6pm...

-JuLiuZ

Edited by Black_CSR

Well I didn't know someone threw a bottle at the cops, that explains a lot. I was expecting police and the possibility of a yellow sticker, but I wasnt expecting a freakin road block! The cops should of handled it better by targeting those doing burnouts and being disorderly (probably about 10% of the people there), rather than punish everybody there. Getting licence plate numbers of people doing burnouts and stopping those cars at the road block would have made a better night for everybody.. as well as on the spot drinking fines (which i'm sure would have made for less trouble).

Needless to say I won't be going on any of these huge cruises again after this experience which really sucks.

it was a P plater his mate dropped him of at his car he drove 100mtr and was pulled over blew 0.02 when taken to the station for 2nd check blew 0.00 and was allowed to leave.

The cops could of easily targeted the ppl doin burnouts. The helicoptor was overhead long b4 cars rocked up and they claim to have this whizz bang flash new camera up there. It wouldnt of been hard to pick up the number plates of the ppl doin burnouts if its a great as they make out.

The police reaction was a bit over the top but at the same time last nights events have made me have 2nd thoughts about headin to coastals tonight and i'm sure a few other ppl as well. So the police may of succedded in what they set out to do.

it was a P plater his mate dropped him of at his car he drove 100mtr and was pulled over blew 0.02 when taken to the station for 2nd check blew 0.00 and was allowed to leave.

The cops could of easily targeted the ppl doin burnouts. The helicoptor was overhead long b4 cars rocked up and they claim to have this whizz bang flash new camera up there. It wouldnt of been hard to pick up the number plates of the ppl doin burnouts if its a great as they make out.

The police reaction was a bit over the top but at the same time last nights events have made me have 2nd thoughts about headin to coastals tonight and i'm sure a few other ppl as well. So the police may of succedded in what they set out to do.

did u see who threw the bottle at the cop?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...