Jump to content
SAU Community

Recommended Posts

Well its time to start cleaning out my garage :/

items are located in Melb and will only post for the small ones

Here we go

- heater box for r32 x 2 - -$50 each

- powersteering resivoirs x 2 - $30 each

- hicas pump and lines - $40

- white pearl 32 sedan boot (no damage, but no wing) - $50

- white 32 sedan boot tiny dint at back with type m spoiler - $80

- brake master cylinder and brake booster x 2 - $80 each

- white pearl r32 bonnet tiny dint at front just above where the headlight is - $80

- charcoal cannister - $20

- Maroon LHS r32 guard few dints (from half cut) $30

- rear k frame from r32, no diff - $80

- 32 sedan headlining (non sunroof - may also fit coupe not to sure) - $30

- rear seat in velour material bottom part from sedan and top part from a coupe $50

Added

Also got a stock r32 turbo, maybe a little shaft play not to sure, also comes with stock side mount some piping, manifold, dump pipe, and a few lines (may also have the stock front pipe to) $250 ono

Also have 6 rb20det injectors on stock fuel rail - Now free with turbo setup

- pair of front seats for r32 cloth material gc - $80

- passenger side r32 seat in velour gc - $40

- r32 automatic transmission, was shifting fine when took out to convert to manual - $50

Also have many interior bits and other parts from a 32 sedan. Prices are negotiable

Cheers Nick

Link to comment
https://www.sau.com.au/forums/topic/152598-r32-gtst-parts-for-sale/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Added

- pair of front seats for r32 cloth material gc - $80

- passenger side r32 seat in velour gc - $40

- r32 automatic transmission, was shifting fine when took out to convert to manual - $50

Also have many interior bits and other parts from a 32 sedan. Prices are negotiable

Nick

J_R32 - No skirts or pods

MAG86 - suspension is struts and springs

Sexual_300 - Do u mean rear pillar trims? if so no trims but i might have some of the black slips if thats what ur after

ducki - no radiator but have thermo fan

PM if interested guys

ill have 2 go take a picture of my car stripped out haha.. umm these plastic things that are 4 the Rear pillars.. they were all cracked n when we removed the plastic n all the dodgy trim off it.. they all broke lol :laugh:

heres wat i mean man..

http://img408.imageshack.us/my.php?image=stripped5yq.jpg

sorry about pic quality.. did it with my camera phone just before.

Edited by Sexual_300

ill try take 1 tomorrow man.. umm they are like the trangle shaped bits that are on the rear pillars n are near the rear quarter glass.. n those clips that go in side/shell .. see in that pic that plastic thing thats all round n shit.. thats a clip, its just broken off n old lol.

Also got a stock r32 turbo, maybe a little shaft play not to sure, also comes with stock side mount some piping, manifold, dump pipe, and a few lines (may also have the stock front pipe to) $250 ono

Also have 6 rb20det injectors on stock fuel rail - $60

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...