Jump to content
SAU Community

Recommended Posts

Well its time to start cleaning out my garage :/

items are located in Melb and will only post for the small ones

Here we go

- heater box for r32 x 2 - -$50 each

- powersteering resivoirs x 2 - $30 each

- hicas pump and lines - $40

- white pearl 32 sedan boot (no damage, but no wing) - $50

- white 32 sedan boot tiny dint at back with type m spoiler - $80

- brake master cylinder and brake booster x 2 - $80 each

- white pearl r32 bonnet tiny dint at front just above where the headlight is - $80

- charcoal cannister - $20

- Maroon LHS r32 guard few dints (from half cut) $30

- rear k frame from r32, no diff - $80

- 32 sedan headlining (non sunroof - may also fit coupe not to sure) - $30

- rear seat in velour material bottom part from sedan and top part from a coupe $50

Added

Also got a stock r32 turbo, maybe a little shaft play not to sure, also comes with stock side mount some piping, manifold, dump pipe, and a few lines (may also have the stock front pipe to) $250 ono

Also have 6 rb20det injectors on stock fuel rail - Now free with turbo setup

- pair of front seats for r32 cloth material gc - $80

- passenger side r32 seat in velour gc - $40

- r32 automatic transmission, was shifting fine when took out to convert to manual - $50

Also have many interior bits and other parts from a 32 sedan. Prices are negotiable

Cheers Nick

Link to comment
https://www.sau.com.au/forums/topic/152598-r32-gtst-parts-for-sale/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Added

- pair of front seats for r32 cloth material gc - $80

- passenger side r32 seat in velour gc - $40

- r32 automatic transmission, was shifting fine when took out to convert to manual - $50

Also have many interior bits and other parts from a 32 sedan. Prices are negotiable

Nick

J_R32 - No skirts or pods

MAG86 - suspension is struts and springs

Sexual_300 - Do u mean rear pillar trims? if so no trims but i might have some of the black slips if thats what ur after

ducki - no radiator but have thermo fan

PM if interested guys

ill have 2 go take a picture of my car stripped out haha.. umm these plastic things that are 4 the Rear pillars.. they were all cracked n when we removed the plastic n all the dodgy trim off it.. they all broke lol :laugh:

heres wat i mean man..

http://img408.imageshack.us/my.php?image=stripped5yq.jpg

sorry about pic quality.. did it with my camera phone just before.

Edited by Sexual_300

ill try take 1 tomorrow man.. umm they are like the trangle shaped bits that are on the rear pillars n are near the rear quarter glass.. n those clips that go in side/shell .. see in that pic that plastic thing thats all round n shit.. thats a clip, its just broken off n old lol.

Also got a stock r32 turbo, maybe a little shaft play not to sure, also comes with stock side mount some piping, manifold, dump pipe, and a few lines (may also have the stock front pipe to) $250 ono

Also have 6 rb20det injectors on stock fuel rail - $60

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...