Jump to content
SAU Community

Recommended Posts

Now I'm half keen on a S2 Stagea as they have pretty much everything I want. Space, comfortable and reasonable performance.

My question is this, is it cheaper to import and comply/rego a car or buy a landed one. Further to this is there anything I should be wary of when importing a stagea?

I was hoping to spend well under 20K, actually as close as possible to 15k is this achievable?

Link to comment
https://www.sau.com.au/forums/topic/152904-importing-or-buying-already-landed/
Share on other sites

Oh boy this subject has been covered so many times, (and I've only been a member for about 4 months)!!

Importing will give you a better car at a cheaper price, but you have to have the dosh up front, (most of it) and be very patient, cos it takes 2 months to get a car here. There are many pit falls, but it can be rewarding. I'll tell you how rewarding next week when mine arrives. :) On the other side, buying one here will save you a lot of work. You can drive it first. (BIG plus). AND you can NEGOTIATE the price. Also you'll get it immediately. I would have gone down the "buy it here path", but I know that I still saved about $5000 - $10,000 importing myself.

If you want to import, PM me and I'll tell you more..... much more.

No, I am not a dealer.

Yes there is a lot to be wary of! But most of it can be overcome.

I dont really think its fair to say that you will get a better car for less.

For example, SEVS require you to have a pretty much stock Stagea for complaince, hence, it wont be "much better". Sure it will have some bolt on mods, but nothing more than whats for sale locally.

Additionally, there is nothing like talking to the seller, someone who actually knows the history. I guess in the end it comes down to the person that is selling their car.

For example, I will be putting my car up for sale as soon as I get my 200+awkw tune, just awaiting my DFA back from SK. To give you an idea of what 20k buys you locally, check out http://ebay.clearbridge.com.au/lachlan.html

Id say thats far better than any importable Stagea, specially with all the extra cash spent on it. And as I said before, you can talk to the seller and ask all the details (such as what ive listed with what oils i used, how regularly I service, what driving history of the car is etc etc etc)

I've imported two cars before, but chose to buy my Stagea locally. For me, it was more a case of "I want it now/need it now" and didnt want to wait. I now want an S13 pig to drift and thrash around, and for that purpose I am really considering importing as local sellers want too much, but for something that has to go SEVS's, I can honestly say there isnt much in it.

Thanks for the response and offer of guidance. Once I confirm what I want to do I will take you up on it. The wait will suit me honestly as if I decide to do it (get a car allowance through work and I'm just working out the numbers) I cant give me car back until after August this year.

After having a breeze through J-spec I saw this >> http://www.j-spec.com.au/list/index.php?ID=8837 which although its km's are high it still seemed OK value.

I dont really think its fair to say that you will get a better car for less.

For example, SEVS require you to have a pretty much stock Stagea for complaince, hence, it wont be "much better". Sure it will have some bolt on mods, but nothing more than whats for sale locally.

Additionally, there is nothing like talking to the seller, someone who actually knows the history. I guess in the end it comes down to the person that is selling their car.

For example, I will be putting my car up for sale as soon as I get my 200+awkw tune, just awaiting my DFA back from SK. To give you an idea of what 20k buys you locally, check out http://ebay.clearbridge.com.au/lachlan.htm

Id say thats far better than any importable Stagea, specially with all the extra cash spent on it.

Linky no work :)

I updated my post and fixed the link, was missing the "l" at the end of html.

Also, a note with M35 Stageas. There is currently, to the best of my knowledge, nowhere to comply them in Australia. If you want to bring it in and give it to a shop as their test car for compliance, it will be free compliance but expect the process to take between 6 to 18 months.

My question is this, is it cheaper to import and comply/rego a car or buy a landed one. Further to this is there anything I should be wary of when importing a stagea?

Phew, you are about to discover how true the saying is "opinions are like arseh0les - everyone has one"

I asked this question once, and never again.

And no, I didn't import mine.

I have updated my site with photos. http://ebay.clearbridge.com.au/lachlan.html

I am not "selling" it right now as Ive not tuned it for over 200awkw, but once I do, I will put it on the market right away. Alternatively id cut 500 off the price and sell it with all the hardware. 160awkw is still fast enough for now, but I want to feel the power of 200awkw :)

As for some advice, here is an alright thread. http://www.skylinesaustralia.com/forums/in...showtopic=92065

http://www.skylinesaustralia.com/forums/in...showtopic=80601

http://www.skylinesaustralia.com/forums/in...howtopic=148428

I have updated my site with photos. http://ebay.clearbridge.com.au/lachlan.html

I am not "selling" it right now as Ive not tuned it for over 200awkw, but once I do, I will put it on the market right away. Alternatively id cut 500 off the price and sell it with all the hardware. 160awkw is still fast enough for now, but I want to feel the power of 200awkw :happy:

As for some advice, here is an alright thread. http://www.skylinesaustralia.com/forums/in...showtopic=92065

http://www.skylinesaustralia.com/forums/in...showtopic=80601

http://www.skylinesaustralia.com/forums/in...howtopic=148428

Thanks for your helpp mate, appreciate it. BTW I still cant see pics on your link, sorry.

You're all traitors... keep your stageas, sell a kidney or something.

yeah, I sold my kneecap in order to keep my Stagea

Bought mine up in Qld, was good to see it in the flesh and not have problems with compliance etc. Plus at that stage it was the cheapest in Australia, but IMO the best bargain (Dayz series 1 for 18k when stnd S1 were 20k plus, and S2 was 25k plus)

fly510, just click the link http://ebay.clearbridge.com.au/lachlan.html

It 100% has the photos, maybe it saved in your cache without. Open that page then press the "refresh" button next to the stop button. Alternatively, press F5.

yeah, I sold my kneecap in order to keep my Stagea

Bought mine up in Qld, was good to see it in the flesh and not have problems with compliance etc. Plus at that stage it was the cheapest in Australia, but IMO the best bargain (Dayz series 1 for 18k when stnd S1 were 20k plus, and S2 was 25k plus)

lol

Ahhh, but you see. I am selling my Stagea because I DO love it so much.

If I was to keep it and use it for what I want to....i would surely kill it. On the other hand, an A31/S13/R32 is not so worthy of care :)

Rest assured, the stagea will return to me later in life...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...