Gtr Box In Rb20?

[jarradr32]

hey just a qustion to see if anyone has successfully fitted a 32 gtr box into a rb20. keep blowing the gtst boxes up and 33 are quite steep in price. any help would be sweet. cheers

[Bl4cK32]

u need to get the transfer case off and have someone weld it up, which would be a costly exercise. Might be more $$ than fitting a r33 2wd box which has almost the same strength as the gtr box...

[32vspecII]

yeah probably not much in terms of savings if you have to get someone to modifiy the 4wd box for you

[dead32]

just put a 25box, its stronger then a gtr one anyways.. get a series 2 theyre stronger then series 1

[jarradr32]

just that i have found cheap gtr box so was wondering if anyone knew how much it costs to get it fabricated to fit and if so where in brissie, gold coast area would do it

[Fitzpatrick Speed Works]

cant imagine it being any cheaper than $500.

[T04GTR]

well you could buy my r34gtt box. and nismo clutch with steel flywheel and rock n roll

[jarradr32]

nah i got quoted 650 which i thought was cheap compared to the 33 box thats why was seeing if it could be fabricated to fit

[Bl4cK32]

add the cost of the tailshaft modding...and if it comes with a slave cylinder or not..

Edited February 5, 2007 by Bl4cK32

[STATUS]

Yeah ive done a couple, mostly behind SR20's with a sr-rb adapter but yes a GTR box will bolt up fine you just need to cut the output section off for the front drive shaft.

you will also need R32 gtr tailshaft and a custom gearbox mount (very simple)

i have attached pics of the modified Transfer, i have one laying around somewhere if you get stuck.

also included a pic of the SR20 to RB20 gearbox housings i keep.

Edited February 9, 2007 by URAS

[2.3_ben.a]

Yeah ive done a couple, mostly behind SR20's with a sr-rb adapter but yes a GTR box will bolt up fine you just need to cut the output section off for the front drive shaft.

you will also need R32 gtr tailshaft and a custom gearbox mount (very simple)

i have attached pics of the modified Transfer, i have one laying around somewhere if you get stuck.

also included a pic of the SR20 to RB20 gearbox housings i keep.

What is that SR to RB adapter? Is it just a standard SR bellhousing or is it a custom part that's been modified to fit?

Ben

[Tom_s13]

Hi from what Iv heard Z32 twinturbo gearbox with RB bell housing fits as well.

[STATUS]

WOW wish i still had these SR to RB bellhousings hahaha

[Duncan]

lol

remember when gearboxes were cheap and plentiful?