Jump to content
SAU Community

Recommended Posts

Thats the thing, they are legal.

Exhaust baffles are not legal, yet Ferrari's etc are allowed.

Its a fair load of crap.

I've been reading a lot of the DOTARS website and other ADR/Emission laws/information etc.

It doesnt seem hard to pass... so the Vic laws must be some pretty rubbish filled stuff, or they just want you ot think thats the case :D

  • Replies 185
  • Created
  • Last Reply

Top Posters In This Topic

wow im surprised they let you clear given the modificaitons done

epa in vic wouldnt let that pass for peanuts

as soon as its aftermarket anything pretty much no chance

:D

Am..........no

Just like any state, you make a modification/s that is untested, then yes they are illegal. You get an emissions test and prove that the car still complies to the emissions, for that year (ie: 1995), then they will pass. Unfortunately each test, in VIC, costs $1500, so if you fail the first time, that's another $1500 to test again.

Just ask Mav. He had lengthy discussions with the EPA officer, who commented that cars with bigger turbos, inj, power, etc, than his car (280rwkw), passed running ecu's like Pfc, Wolf, Motec, etc... EPA even passed Mav's car with the Greddy plenum and fmic, without any testing required.

EPA is not the pack of a'holes everyone makes them out to be.

PS: Congrates Guilt-Toy!! That's an awesome effort :P

They are a pack of mongrels. Its pretty much, any mod... BANG defected even if its making the car run better than it was before.

Even if you DO get tested/approved, the Police can STILL report you even if you've been cleared 110%.

You could go there 10 times a week for all the Gov't cares.

The rules and reglations (in vic) far go anything that any other state has for no clear or apparent reason. Other than power abuse towards the general public and making it impossible for the common punter... and a bit of revenue raising on the side of course.

Why should it cost me 10 times as much for a test on one state compared to another?

Why should i be able to cross a mystical line in the sand and my car can suddenly be cleared/tested where if i cross back the mystical line, suddenly im driving an illegal car?

It does not make sense, but i intend to make good sense of it :D

What AL said is correct, its actually not that hard to pass the emmissions test in vic. Most of our cars would pass if we had a compliance cat and a good tune (not too lean), I was even going to get my s15 tested.

But when i got quoted $1700 and if it failed you HAVE to go back and pay for another test, it was not worth it. If you have the cash you can do it. BLKCRX (james) of CRXaustralia and Hondata fame passed no problem with over 300rwkw from a 1.6l delsol CRX. And thats on a car that had no turbo to start with.

Congrats GT, i was wondering if you still have your EGR hooked up, as under vacuum conditions it injects exhaust gas into the inlet to reduce combustion temps, specifically to target NOx levels. Perhaps if it is hooked up. then you would be able to run leaner mixtures? Also the charcoal canister it there to remove fuel vapour from the tank especially when the tank gets hot and the fuel expands/boils. this is to prevent the pressure forcing raw fuel vapours from going into the atmosphere. Not trying to dampen things, but although it has passed emmissions, the engineer is obliged to check that all these, and pcv/breathers are fully functional, although most engineers dont.

Im pretty sure the charcol canister is all hooked up correctly.. i hooked it back up again last weekend and not sure about the pvc valve.. i think it is all still stock as i run the standard bottom half of the plenum with the plazmaman.

EPA do not issue defects :D

The cops are another story.... But if you get your car tested, pass emissions, get engineered, etc then you can take the defecting officer and his precenct to court for harassment; it has been done and won before. Then the harassment will cease :(

They are a pack of mongrels. Its pretty much, any mod... BANG defected even if its making the car run better than it was before.

Even if you DO get tested/approved, the Police can STILL report you even if you've been cleared 110%.

You could go there 10 times a week for all the Gov't cares.

The rules and reglations (in vic) far go anything that any other state has for no clear or apparent reason. Other than power abuse towards the general public and making it impossible for the common punter... and a bit of revenue raising on the side of course.

Why should it cost me 10 times as much for a test on one state compared to another?

Why should i be able to cross a mystical line in the sand and my car can suddenly be cleared/tested where if i cross back the mystical line, suddenly im driving an illegal car?

It does not make sense, but i intend to make good sense of it :)

EPA do not issue defects :)

The cops are another story.... But if you get your car tested, pass emissions, get engineered, etc then you can take the defecting officer and his precenct to court for harassment; it has been done and won before. Then the harassment will cease :(

The EPA issue a notice, defect, whatever you wanna call it.

Does it really matter what its called? We all know what it means

cheers dude.. Autronic is another ECU that has been known to pass emisions so you should be able to do it to... my car is not legal just yet - i need to get a engineers certificate to finish it off which is comming very soon. but its a good start and something to show mr police man if he gets nasty about it.

nice work dude. do my autronic kthanx :(

hahah nar must feel good to drive around knowing its legal. ive only got halfway there.

The EPA issue a notice, defect, whatever you wanna call it.

Does it really matter what its called? We all know what it means

This is how it works:

Cop pulls you up ancd decides to send you to EPA for ammisions test, you have about 4 weeks to do the test, if you don't go for the test then they cancel your rego. If you do the test and you don't pass they cancel your rego just the same . Same as any other defect .

hey guys top work. This is the type of thing we need to keep doing great work. I think that there is a cat that reduces the amount of NOX its called a 3- way cat, is this what you mean when you say compliance cat.

Cheers Matt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...