Jump to content
SAU Community

Recommended Posts

Hi guys,

I have already sold the Z33... and these pole position seats are actually off the car for sale....

THey will come with Recaro special side adaptors, geniune Recaro rails for Z33 (if you don't want that, it is fine too with a different price), Recaro driver side lumper support. I will also throw in a pair of Nismo airbag sensor plugs for the Z33, so you will not have the airbag warning light and the rest of the airbags in the car will still work properly!

The side adaptors that I am using are specially made by Recaro Australia (not shown in the photos), it looks a lot better and neater than those in the photos... I have those ones in the photos sitting around too, but the seating position is way too high for all of us.... so Recaro Australia specially made those side adaptors for me (of course with extra money) and the seating position is at the stock position now.

Pole position seats are slightly wider than those normal SP-G seats... Porsche GT3/2 seats are actually made based on the pole position SP-G seats, just with a different upper design...

These seats can be engineered and approved for the road use... I have done that with proof/receipt from Burwood Vicroad... so there is no problem with other States I believe!

Each seat is about 11KG (including rails and adaptors)...

Here are some photos of those seats....

pp1.JPG

pp2.JPG

pp3.JPG

pp4.JPG

pp5.JPG

pp6.JPG

pp7.JPG

Brand New Price: $AU 5,000.00

Asking for $AU 3,200.00 for a pair...o.n.o. (with Z33 rails)

Asking for $AU 2,800.00 for a pair... o.n.o. (without Z33 rails, but still comes with side adaptors)

cheers,

richie

Edited by nismo350z

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...