Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

hey mate, do you do pickup ? if so do you have any for r32gtst in stock?

Yes and Yes :ninja: We have plenty in stock and your welcome to drop by and pickup

Cheers,

Steve

hey do you make 4" systems also??? or plan to in the future. GTT

We have these on the way for R34 GTT, however they are 3 inch, not 4.

Regards,

Steve

We have these on the way for R34 GTT, however they are 3 inch, not 4.

Regards,

Steve

Hi Steve,

Any update on these as i would love to get my hands on one this month...

Thanks.

Rad.

Hi Steve,

Any update on these as i would love to get my hands on one this month...

Thanks.

Rad.

Hi Rad, unfortunately we aren't expecting them to be ready within a month im afraid.

As soon as we have an ETA on stock arrival I will pm you immediately.

Thanks for your patience.

Regards,

Steve

you still have the XForce cats in stock steve?

We sure do - Depending on specifically which model you need.

Regards,

Steve

We sure do - Depending on specifically which model you need.

Regards,

Steve

do you have only the 3inch ceramic xforce for the r33 gtst is it? Or do they come in a metal body on the inside as well?

  • 3 weeks later...
Hi mate,

e mail sent about one for an R32 gtst :action-smiley-069:

thanks

Jason

Hi Jason, please send me a pm with your enquiry, or post here :thumbsup:

We have plenty in stock ready to go.

Cheers,

Steve

  • 5 weeks later...

This special offer is still available and we have plenty of these split dump/front pipes in stock, ready to go :)

Get in quick to make the most of this offer!

Cheers,

Steve

Hi Sam, with the HKS GT turbos you may need to remove the splitter section of the dump pipe to allow it to bolt onto the HKS exhaust housing.

Regards,

Steve

  • 2 weeks later...
Hey mate, wondering if you have the split dump/front for the R34 GTT available yet?

No yet unfortuantely.




  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...