Jump to content
SAU Community

  

55 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

I just bought a high flow turbo which I was told was a genuine bolt on job. Being fairly new to the scene I thought that bolt on meant it was pretty much a straight swap ie. no stuffing around with oil and water lines / fittings. Instead I get a turbo which isn't even close to being a straight swap. None of the stock oil/water lines match up and the turbo needs to be "clocked" so it matches up with the stock air inlet.

These are all questions I should have asked before I got the work done, isn't hindsight great.

Anyway, I just wanted to see what other peoples ideas of "bolt-on" were.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/155503-whats-your-idea-of-a-bolt-on-turbo/
Share on other sites

well bolt on is.. straight on no mods.. custom is doin something different to make it work..

when u have to get new lines or something like that u cant classify that as straight on.. ur mucking around...

Tis bolt on if your engine can handle the turbo upgrade..

a turbo that requires some bolting requirements

LoL..

Is the HKS GT-RS kit with the oil water lines and all fittings and shit.. is that classified as bolt on? cos everything is designed to fit like the turbo and oil n water lines in the kit?

I just bought a high flow turbo which I was told was a genuine bolt on job. Being fairly new to the scene I thought that bolt on meant it was pretty much a straight swap ie. no stuffing around with oil and water lines / fittings. Instead I get a turbo which isn't even close to being a straight swap. None of the stock oil/water lines match up and the turbo needs to be "clocked" so it matches up with the stock air inlet.

These are all questions I should have asked before I got the work done, isn't hindsight great.

Anyway, I just wanted to see what other peoples ideas of "bolt-on" were.

Cheers

bought off who?

i class it as 1 that you attach with bolts, rather than with say, glue or zip-ties.

but seriously, i would class it as oil and water lines screwing straight in, even if the oil line has to have 1 of the fittings drilled out to let more oil through (e.g. a slide highflow). and most importantly that it bolts up to your manifold.

Bolt on = bolts onto the stock gear.

Manifold, dump, intake pipings

If you need to mod a oil/water line, big deal. Its really not that hard.

I wouldnt count oil lines depending on the type of turbo (covered further on)

As for the turbo being "clocked" what you do mean?

One of the housings rotated? If so, thats pretty much gonna happen on any turbo as no-one is going to get it perfect for your car

Also depends what types of turbos (as i said earlier) ie Bush --> Ball bearing and vice versa.

If thats the case where your changing from one type of turbo to another (and reason for the oil/water mods) then its a bit of buyer research aswell as the seller IMO.

Two way street on that one as an owner you should really take a little interest in what they are purchasing :(

Can you give more details?

Type of turbo you had, type of turbo you have change too? etc?

Would kinda help us to give you a better idea maybe :)

The product is a direct competitor with the GCG highflow. Stock turbo to ball bearing highflow.

It was explicitly stated that no modifications to the stock lines were required. The only change needed was to change the banjo bolts (not the entire fitting, just the threaded part) because the thread on the new core was different.

The reality is the oil and water lines need to be changed, the oil drain needs to be modified and the wastegate actuator needs to be modified. The fittings provided look like they are designed for rubber hoses and as such, are completely useless.

I personally wouldn't call this a bolt on affair.

Thanks for the input.

Edited by Ol_Mate

if that is the case then it isn't a high-flow, it is a whole new turbo. it obviously isn't using the stock housing, otherwise it would just bolt back up.

i'm not aware of any other high-flows that use ball bearing other than the GCG. i know slide's are a bush bearing and it needs the hole in the banjo line drilled out to let more oil in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...