Jump to content
SAU Community

Recommended Posts

hey all,

i followed the diagram on the closed thread about modding the stock R33 bov to make it flutter.

and it sounds nuts but i am having problems with my car stalling.

it only happens if i bring the revs up and drop them fast. it ALWAYS stalls without fail.

e.g. im in first/second gear and i take the revs to 3-4 then push the clutch in. the revs drop to below 1 and it STALLs.

its fine if i rev them to 3-4 push clutch in, change gear and let out the clutch.

i thought perphaps adjusting my idle would stop it?

please help me because i cant leave this flutter on if my car is gonna keep stalling.

cheers all

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

its stalling cos you are dumping measured air to the atmosphere

the ecu doesnt know so its extra rich, cos its missing air

put the bov how nissan intended it

or get a bov stall hack device

please help me because i cant leave this flutter on if my car is gonna keep stalling.

You want a bit of wank factor, you get stall.

Thats just how life is.

Otherwise fork out for an aftermarket ECU and have it tuned out.

its stalling cos you are dumping measured air to the atmosphere

the ecu doesnt know so its extra rich, cos its missing air

paul you really are a dick. learn to read.

Rochey: did you squash the top of the bov, or plug up the recirulation hose? either way you have stopped air from going the way it is supposed to so it is going back out the intake and being read twice, so the car is running rich.

you have 2 options. 1 will defiantely work, the other may not.

1) return the setup back to standard.

2) put a new set of spark plugs in. i know people with aftermarket atmo bovs that have no issues with stalling. they put the bov on, it made it stall a bit, they put new plugs in and it went away. i even had the stalling issue on my stock bov when my plugs were shagged.

paul you really are a dick. learn to read.

Rochey: did you squash the top of the bov, or plug up the recirulation hose? either way you have stopped air from going the way it is supposed to so it is going back out the intake and being read twice, so the car is running rich.

you have 2 options. 1 will defiantely work, the other may not.

1) return the setup back to standard.

2) put a new set of spark plugs in. i know people with aftermarket atmo bovs that have no issues with stalling. they put the bov on, it made it stall a bit, they put new plugs in and it went away. i even had the stalling issue on my stock bov when my plugs were shagged.

Plugs stop stalling from a blanked off BOV?

:D

He followed the guide on how to make the stock BOV hold more pressure.

He isn't dumping air into the atmosphere at all.

Quite the opposite, he's letting NONE out!

Have a read. :D

http://autospeed.drive.com.au/cms/A_1457/article.html

paul you really are a dick. learn to read.

Rochey: did you squash the top of the bov, or plug up the recirulation hose? either way you have stopped air from going the way it is supposed to so it is going back out the intake and being read twice, so the car is running rich.

you have 2 options. 1 will defiantely work, the other may not.

1) return the setup back to standard.

2) put a new set of spark plugs in. i know people with aftermarket atmo bovs that have no issues with stalling. they put the bov on, it made it stall a bit, they put new plugs in and it went away. i even had the stalling issue on my stock bov when my plugs were shagged.

all i did was put a piece of tin between the stock bov and the manifold its connected too. i left the lil hose on the bov connected as i didnt see the point of disconnecting it and plugging it up if leaving it connectied to the bov would do the same thing.

so changing my spark plugs would do it ya recon?

Otherwise fork out for an aftermarket ECU and have it tuned out.

So an aftermarket ecu would prevent it from stalling even tho he would still have the afm there?

Or would it completely stop it from stalling if he had an ecu without a map sensor? but then he'd be screwed with cold start... you cant win just leave it plumb back

EDIT : Or buy a safc2 and get that tuned...

i (and a few mates) had the stalling issue that everyone attributes to atmo bovs, except for the fact i have a 100% stock bov.

the reason that a new set of plugs may fix it is that if the old plugs are getting old they will be foulded and the gap may be bigger than needed. so by putting in a new set of plugs you get a stronger spark which will burn up the extra fuel.

new plugs have solved the stalling issue on a few different turbo cars i know, all but 2 with atmo bovs.

i (and a few mates) had the stalling issue that everyone attributes to atmo bovs, except for the fact i have a 100% stock bov.

the reason that a new set of plugs may fix it is that if the old plugs are getting old they will be foulded and the gap may be bigger than needed. so by putting in a new set of plugs you get a stronger spark which will burn up the extra fuel.

new plugs have solved the stalling issue on a few different turbo cars i know, all but 2 with atmo bovs.

Thats just a band aid fix (if it does work which i've never heard of)... to fix it properly you need a form of engine management like R31Nismoid said... safc2 is designed to help with this EXACT issue.. and your car will run better aswell...

EDIT : Please show proof of this band aid fix and how logically a spark plug can compensate for the amount of extra fuel thrown in to make it stall... i understand it for missfire but not for full on stalling.

So an aftermarket ecu would prevent it from stalling even tho he would still have the afm there?

Or would it completely stop it from stalling if he had an ecu without a map sensor? but then he'd be screwed with cold start... you cant win just leave it plumb back

EDIT : Or buy a safc2 and get that tuned...

Sorry, a bit OT, but how does a map sensor stuff cold start(id really hate to own a $40,000 supra with cold start issues)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...