Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • 4 weeks later...

guys, so youve had a bash at it lol. will get it cracked and let you know, mine has poped back up again but im not giving up, if the heat gun gives a tempory solution then a fix is not far off, will let you all know when i crack it!

just an update for you all here - apparently the last post about removing the glove box and injecting in some expanding foam stuff seems to have worked out well. Take a look over Mava's thread again and see what you think.

  • 3 weeks later...

Guys heres the reply instead of linking back:-

"ok, pics will follow when i have time, permanent fix requires:

removal of glove box. there you can see the plastic backing of the dashboard. drill a small hole in the middle behind the bubble dont go through the front! and 2 smaller ones at each end of the buble.

use some expanding foam to fill the middle hole and continue until it comes out both lttle holes. clamp and leave overnight.

superglue doesnt work as the foam backing of the dash absorbs it and goes hard, also liquid nails is too thick to spread inside the hole.

caution if you heat it slightly when you put the foam behind as mine started expanding outover until i clamped it lol.

mines all mupy now due to the superglue but its now stuck in place with the foam and if i had done that first i would be more than happy lol.

will get pics up soon. "

I'll be trying this later in the week with before and after photos for everyones inspection :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure if you're being serious? I, and all the car people i know, ALWAYS use a torque wrench for wheel nuts. I assumed any car person, apart from tyre centre monkeys with rattle gun in hand, would do it properly.  Anyway, no further reply from me on this unless legit discussion from OP or his query so, over to you, knock yerself out.
    • I was wondering about this. I'll do some research.
    • Why not? Since mines been built, I've used low boost maybe 5 times.
    • Yeah, so widen your search to any Nissan speedo first, then go wider if needed. I will say though, that there is a better than even chance that what I said first will likely come into play. They quite possibly won't come apart without damage. I tried to disassemble a stepper gauge that I wanted to repair. There was no way that needle was coming off the spindle, and I could not see how the spindle would come out of the mechanism behind. Assembled once, never to be disassembled, was my conclusion. Could be the same on the R34 cluster. Failing that - take the cluster to a workshop that specialises in automotive instrument work. There's usually at least one in every Australian city. They'll either be able to do it for you for small cost, or tell you it can't be done. It might be that "it can't be done" unless you follow some arcane procedure, including trickiness to glue it back together or something, that only experienced techs know.
    • Well, given that I, an engineer, almost never bring out the torque wrench to tighten up chassis bolts, despite fully knowing the theory, and instead rely on feel, which I happen to know is exactly how the majority of mechanics do things, should tell you the level of actual peril that exists from not achieving exactly 88 Nm of torque. How about if I just say then that 88Nm is at the lower end of the correct wheel nut torque range? Everyone knows how to tighten a wheel nut, right? And almost no-one ever brings out the torque wrench for that task
×
×
  • Create New...