Jump to content
SAU Community

Recommended Posts

Taking the bnr32 out for its first track day tomorrow at hidden valley and wondering if its worth putting in some octane booster, car is running a remapped ecu (done in Japan as best we can tell by zeni tani) has been checked out by workshop here and all is good, new car and not sure if they had to retune or anything to allow for less octane in fuel . Only good available fuel available in town is BP Ultimate 98RON. Have used NOS brand octane booster before when travelling outside of town and forced to use PULP

PULP 95 +street octane booster 3 = 98 (same as BP ultimate) no drama's with car at all.

Given Jap fuel is 100RON (I believe anyway) and all I couldn't help but wonder if some octane booster even in BP ultimate might be worthwhile.

Two options are street tune NOS stuff +3 octane numbers = 101

NOS race stuff +6 octane numbers = 104

if mixed with BP ultimate.

Damn hot here in Darwin and anything to reduce possible knock is a good idea, Just wondering if anyone has any input? will of course reset CPU if using this blended fuel to allow ecu to advance timing happily.

Edited by noone
Link to comment
https://www.sau.com.au/forums/topic/156764-octane-booster-trackday/
Share on other sites

might as well, it's cheap insurance. if you don't bother resetting the ECU then the ECU will still be using the conservative map it learnt for 98RON. reset it after the track day so any learning for 98+octane boost is trashed :D

My Bad,Yeh sorry wrong terminology used by me,

Packet for NOS stuff says 3 or 6 Full octane numbers, 30 or 60 points so numbers should still add up as stated earlier or damn close to anyway.

Edited by noone

I don't think you're going to find anyone with an "other" opinion besides my "it's cheap insurance, do it". somehow, flogging the ring out of a turbo car in darwin weather on standard 98 RON fuel just doesn't seem like a smart idea. put octane boost in for safety and have fun. keep an ear out for detonation, helps to have someone trackside who can help as it can be hard to hear with a helmet on.

Edited by Kinks

if the car has been tuned properly then adding octane booster won't do much as there should be no knock to speak of

but, if its anything below 100% perfect tuning, then adding some might prevent and mild knock and might prolong your engine that little bit longer...

the "its cheap insurance" line has to be true, i mean for $10-20 a bottle and the peace of mind that you probably won't have any pinging... i personally think why not?

Thanks for the opinions my "other " comment should of read more like bump certainly no offense meant.

Yeh tune was pretty good no real knock to speak of ever

Ended up chucking some in and having a damn good time, street tyres on track is "interesting" no pinging overheating or any issues so happy as could be, maybe a little dehydrated though damn hot in helmet and long sleeves n pants in the tropics.

Appreciate the help guys

a whole bottle of nulon pro strength in just under half a tank of shell v-power 98 into my gts't auto a fortnight ago when tookit dragging. I noticed a good difference mainly because it stopped the car pinging like it does even on 98..

my gts t still has the little green sticker in the fuel filler door that i believe states use 100ron fuel only..lol.

imo, it's a big waste of money. I've seen tests done on the octane boosters, and they contain one or a combination of different sorts of active ingredients.

Depending on what it is, it might actually be detrimental.

e.g. adding ethanol boosts octane rating.

I forgot what the term is, but ethanol also has less kj of energy per mol that you burn. I think that's right.

Like people say with the shell extreme 100 octane, you need a lot more ignition timing to run it, otherwise you make less power.

IMO, don't waste your money. It's just marketing. Full sik octane booster makes your car sik.

I drive my car hard everytime I drive it. I don't use octane booster.

If your tune is safe (e.g. checked on dyno), I don't see how using octane booster will make a difference.

If your tune is not safe (e.g. leaning out), then I don't see how using octane booster that one day will make a difference either. If it's always lean and pinging, what's one more day?

Octane booster sucks because they use MMT - stuff which coats your O2 sensor, spark plugs and pretty much everything else.

I would not advise putting methanol in your tank as its extremely corrosive. Adding 10% ethanol would be an alternative however you may need to richen up the car a tad because of the leaning effect of ethanol.

i wouldn't run with the octane booster. as mentioned above they have a few downsides. and they add sweet fck all to the octane rating of your fuel. going from 98 to 98.3 is going to do bugger all except make your plugs and dump pipe, and 02 sensor turn orange after a while from the crud in the additive. as for one brand adding 30 points I call bs on that claim.

Hmm couple of things.

Don't add any fuel additive that changes the density of the fuel. This is just asking for trouble. Yes ethanol will change the density of the fuel.

If you are using a hudrocarbon additive don't touch the stuff or get in on your paint. Cyclic hydrocarbon molecules are seriously evil things - don't breath the stuff in etc. Specifically I am talking about toluene, but this applies to most other additives, even oils & hydrocarbons in general.

Choose your Octane booster wisely. I use this stuff. If you only run it periodically you will find the orange cack doesn't build up much if at all - atleast that is what I have found.

http://www.nulon.com.au/products.php?productId=pso

Chances are if a product is marketed as octane booster & fuel injector cleaner it does sfa to the octane rating.

Just my 10 cents.

The "proper" octane boosters do work such as Wynns Race Formula and Nulon ProStrength. There is plenty of tests done and it adds approx 2-3 RON on 98 RON fuel. Its the dodgy $10 stuff in a bottle thats good for nothing.

dunno ifits been covered b4 but my mate rekns if u take mothballs and disolve them in a bit of fuel and strain the wax out then put the liquid into the fuel tank thatit increases the octane like crazy...

no idea ifits true. lol.. anyone know?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...