Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

And for the sakes of it, i reckon 250 rwkw should see you with a 11 with a good launch. I ran 12.18 with only 231rwkw.

was that with semi slicks or streeters when u ran that 12.98?

impressive time though man :wave:

what setup were you running when you ran both those times bud?

Edited by R33GOD
what would my r33 manual do with 317rwkw ? with 265 street rubber and with some nice slicks?

Could it be a 10 second car?

NO NO NO.....Mid 11's with slicks great lauch no wheel-spin.

Will only be a 10s if you push 400rwkw+

So need more power and be able to put it to the ground to get 10's.(NITROUS MAYBE) :wave:

400rwkw+ is not required for a 10-sec pass in a RWD car around 1400kg mark.

A good launch and sticky tyres and around 330-370 (depending on the setup which plays a big part) will net you a 10 easy enough.

You might even get there with 317, although im not sure exactly if it will or not.

Well into the 11's quite easily though.

400rwkw+ is definately not required for a high 10

Just my 2c,

Again I think its more upto the set-up rather than the power the vehicle is making...(power is a contributing factor, dont get me wrong.)

R33GOD, practice makes perfect thats all there is to it. The people posting that they ran hi 12s with 200rwkw did not do it on their first run ever, well I assume anyway. They have probably been going out a few times to practice there launches and get their 60fts down low and experimenting what rpm to change gears at...its all fun.

RE: running 10s -At that power level people usually are more consistant with quicker times with a built auto and soft suspension..

To put things into perspective, I know of many VL Turbos running hi 10s with just over 300rwkw...

example..320rwkw, hi-stall convertor, slicks, soft suspension(90/10 front shocks) etc etc, + slicks equats to 10.9's consistantly..ive seen this done before...

Thats more like 2$...

Thanks Daniel

Edited by MZTRBO

I reckon 170rwkw-ish is all you need to crack 12.9 on road tyres as 2rismo has already mentioned. Drag radials lower again.

Of course if you have lots more power it makes it easier but, I reckon it's not that hard. Practice isn't a difficult thing to do, thats what some of it comes down to as others have mentioned. This kind of drag racing requires very little actual driver skill at all.

400rwkw+ is not required for a 10-sec pass in a RWD car around 1400kg mark.

A good launch and sticky tyres and around 330-370 (depending on the setup which plays a big part) will net you a 10 easy enough.

You might even get there with 317, although im not sure exactly if it will or not.

Well into the 11's quite easily though.

400rwkw+ is definately not required for a high 10

11's 317 ET no problems.....

10's especially mid tens...Drag race...reaction times and all....370+kws...

10's ...low type ET....400kws....and you better hold on tight... :blush:

was that with semi slicks or streeters when u ran that 12.98?

impressive time though man :laugh:

what setup were you running when you ran both those times bud?

12.98 was with street tyres with the normal bolt on stuff with a SAFC.

12.18 as per signature with semi road slicks.

Takes plenty of practise, as i said its all in the launch, from there on, its just slam those gears home.

Last night finally got my 12's

On street rubber@25psi (toyo t1r's 225/50/r16)

R33 Gts25t with power approx 220rwkw

60ft: 2.062

ET: 12.964

MPH: 111.86

Highest MPH i saw was a 112mph

Well done Ray, I told you it was in there, you just had to dig it out.

:P cheers :P

Hahhhaha i know ey! THanks Gary :P

I'm actually really happy with the turbo and tune the power delivery so nice and smooth although its laggy my fault(my choice), even with 220rwkw and 225 street rubber i have NO traction issues its a good feeling.

Going to get myself on a set of drag radials now hehe 2rismo where are you?

Hahhhaha i know ey! THanks Gary :D

I'm actually really happy with the turbo and tune the power delivery so nice and smooth although its laggy my fault(my choice), even with 220rwkw and 225 street rubber i have NO traction issues its a good feeling.

Going to get myself on a set of drag radials now hehe 2rismo where are you?

First run, no burn out SOSK found 0.3 sec using the MT ET's.

:P cheers :P

I know this is a little off topic but are there any thoughts on what sort of rpm to shift at with an RB25 on the drag strip? Is it necessary to wring it's neck to 7200 rpm? or shift a little earlier - say 6500 to 6800?

I could only manage 13.9 @ 100mph (on a 2.1sec 60ft) shifting gears at 7000 rpm in my R34 GTT (with 185rwkw and street tyres).

Depends on alot of factors like your power/torque curve peak power point, post up your dyno graph so we can analyse it.

i was shifting at 7100-7200 but i've got a rebuild engine and my power curve just keeps climbing with the boost holding up top, its different for each car.

my 2c

I know this is a little off topic but are there any thoughts on what sort of rpm to shift at with an RB25 on the drag strip? Is it necessary to wring it's neck to 7200 rpm? or shift a little earlier - say 6500 to 6800?

I could only manage 13.9 @ 100mph (on a 2.1sec 60ft) shifting gears at 7000 rpm in my R34 GTT (with 185rwkw and street tyres).

Should be up changing much earlier than 7200rpm, try 6500-6800rpm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
×
×
  • Create New...