Jump to content
SAU Community

Recommended Posts

My front rotors are warped and I have given myself 2 options.

Option 1

Bolt on a used brembo set from a BNR34

This is quite costly and I might have to deal with warped stock BNR34 rotors too.

Option 2

Aftermarket replacement rotors

For option 2, I have narrowed down my choices to the below:-

1) Dixcel HD

2) Dixcel HS

3) Project Mu Pure Plus 6 slit

4) Endless Straight 6

Are there any users/those in the know of the above here that can give comments/reviews?

Many thanks in advance. :)

Link to comment
https://www.sau.com.au/forums/topic/157640-r34-gtt-fr-rotors-replacement/
Share on other sites

SKY 34, considered it but not too sure if it will affect the FR and RR brake bias and also whether it will clear the rims.

BHDave, thanks for the input.

Howie, as below:-

1) Dixcel HD - around Y24000

2) Dixcel HS - around Y38000

3) Project Mu Pure Plus 6 slit - around Y20000

4) Endless Straight 6 - around Y42000

The above excludes shipping from Japan.

With option 2, you have missed local DBA and RDA rotors, both makes ones to suit and a fair bit cheaper than the jp import ones. Some of those prices above are more than I paid for the car

I just bot a set of Project Mu SCR's for my GTR. The front rotors were just under $700 delivered from Perfect Run. Shipping rotors from Japan is not cheap. Not on yet so I can't tell you much about how well they work.

A lot of people run DBA 4000's. UAS has them for a bit under $500 for a pair. I know several people who recommended them but have also run across a few who have had them crack after track use.

  • 2 weeks later...
  • 1 month later...

For starters it is risky and dangerous :( to machine the diameter of a disc down just to save a couple of dollars not to mention no warranty if they explode which i have seen happen.Has the rotor been cast for this to happen and to take the risk.

R34 GT rotors are 296mm front

R34GTT rotors are 310mm front

R34 GT-R rotors are 324mm front

DBA rotors are available for the Skyline range including the R34 GTT 310mm where as RDA do not do this particular disc.You can buy std 4000's rotors instead of there slotted if you want.

it was done by a very reputable brake buisness and they wouldn't have done it if they thought it was in any way dangerous. They did it so they carry any warranty issues, and it wasn't to save a couple of dollars it was to save a lot of money.

Edited by nsm034
it was done by a very reputable brake buisness and they wouldn't have done it if they thought it was in any way dangerous. They did it so they carry any warranty issues, and it wasn't to save a couple of dollars it was to save a lot of money.

Each to there own but 6mm is alot to machine a rotor down by and yes i am in the industry.

If anyone wants the correct rotor DBA do the 310mm rotor in the DBA 4000 series.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...