Jump to content
SAU Community

Recommended Posts

Hi All

My name is Ron

Im new to this GTR thing and have a few questions to ask.

Firstly i have recently purchased a 93 R32 GTR and a PFC D-Jetro (thanks to Slide)

I was just wondering what would the costs be for -

1: to install and tune the PFC

2: to do a full service just to make sure everything is ok (as in change all fluids, belts, pumps?? )

and any other things that i should have looked at while its in the shop.

Any help is greatly appreciated

Thanks

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/
Share on other sites

Hey Ron!

and welcome to SAU and SAUWA :P

i can only help with my question;

1: to install and tune the PFC

-im not sure about the cost of installing the PFC. But tuning should be between $400-$600 for your 1st tune.

Best to give some of the workshops around perth and call and they will be able to quote you up.

Check out the The Consolidated Workshop thread

http://www.skylinesaustralia.com/forums/in...howtopic=141454

for a list of workshops NOR and SOR.

My personal recommendation for NOR is Hyperdrive (for tuning/services etc)

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2963186
Share on other sites

For a simple oil change in a workshop (eg XSpeed) you're looking at $180-$217 depending on the quality of oil used.

GT-R, go for the $217 one. They will also give you a report on what work may need to be done and the general overall condition of your car.

May sound like a lot, but it costs me $100 minimum to do my own oil changes, ~$90 for Mobil1 and $10 for a genuine Nissan Oil filter.

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2963228
Share on other sites

im due for my big service now, going to in tune performance, located in bibra lakes SOR, getting timing belt changed, all fan belts changed, coolant replaced, oil replaced, safc dyno tuned, walbro fuel pump fitted. costing $800.

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2963366
Share on other sites

im due for my big service now, going to in tune performance, located in bibra lakes SOR, getting timing belt changed, all fan belts changed, coolant replaced, oil replaced, safc dyno tuned, walbro fuel pump fitted. costing $800.

hey pal, where in bibra lake is that? i live there never seen it. Is the Walbro fuel pump included in that price or are they just puttin one you have in? i have also never seen your skyline around the area either :D

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2964454
Share on other sites

Thanks for all the info guys.

I live south of the river in beckenham.

I was thinking about goin to Top Racing but havn't heard much about them.

Xspeed seems to be the most recommend workshop so i might pay them a visit

to see what im up for.

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2965192
Share on other sites

Thanks for all the info guys.

I live south of the river in beckenham.

I was thinking about goin to Top Racing but havn't heard much about them.

Xspeed seems to be the most recommend workshop so i might pay them a visit

to see what im up for.

top racing provide good service and treat customers with respect unlike some other known shops.

plenty of people will recomend them on here

$217 oil change is a big big rip off, surely pulling a filter off and undoing a sump plug isnt worth $130, its about a 15-20 min job max. i suppose its good value if u got a 15L sump :P

Edited by CruiseLiner
Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2965726
Share on other sites

Top racing really know their work.

Every workshop has their pros and cons. But put it this way I'm yet to find a performance shop that stand behind their tune an ensure their work. The only other place I feel can do this would be Top racing after having dealt with 2 very well known performace shops when it comes to tuning the power FC D-Jettro, both their service and tune were very very poor indeed espically after "paying for what I got".

Rob

Edited by dan_the_man
Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2965816
Share on other sites

Thanks for all the info guys.

I live south of the river in beckenham.

I was thinking about goin to Top Racing but havn't heard much about them.

Xspeed seems to be the most recommend workshop so i might pay them a visit

to see what im up for.

give Top Racing a go

they arte the only workshop that touch my 93gtr

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2966315
Share on other sites

Hi all again

I think i will go to Top Racing. I gave them a call and were really helpfull.

Just have to wait till i get PFC and then im booking it in.

I will ask about a leakdown test to see what condition the engine is in to.

Once again thanks for all of the advice and recommendations.

Link to comment
https://www.sau.com.au/forums/topic/159601-service-costs/#findComment-2968648
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...