Jump to content
SAU Community

Recommended Posts

Just took my GTR out for abit of dragging fun 2night. Was pretty impressed at getting a 13.1 @ 106 mph for a basically stock 32 gtr with just a cat back exhaust and exedy button clutch. The factory spec is 13 flat out of factory right ?

Also something i found weird was i was just red lining 3rd gear as i crossed the finish line. That compared to my supra ( i was redlining 4th gear as i crossed the finish), just wasn't used to it. I guess that is becoz of diff gear ratio's ?

My 60' time of 1.943 is abit high right ?

Any tips on how i can lower that abit ?

Other than that i was pretty happy with it. The AWD sure is great for launches (even with street tires) compared to a rwd with street tyres aswell.

Any comments or advice is very welcome :ninja:

Link to comment
https://www.sau.com.au/forums/topic/159848-gtr-32-14-mile-time/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

nice work, wat sort of mph were you doing in the supra and wat time

umm if i remember right it was 13.00 @ 111 mph

So it had a 12 in it but standard clutch and shitty street tyres restricted launches alot.

GTR should be able to manage a 12.9 easily.

Keep trying!

how should it be able to manage a 12.9 easily when they are 13 flat from factory? and i have very minimal mods. Also consider it is 16 odd years old so it wouldnt be running the factory times now days. :ninja: but ye u are right i should keep trying because practice makes perfect right :)

did u lower ur tyre pressure. and the 1.9 60 footer is a little high i think when mines a 2.0 and its a gtst

yeh i did let them down to about 20 psi in the rear. But i wasnt gettin much traction loss at all really. Yeh i have to perfect the launch and i reckon i could get the time down abit.

i have found

dont go below 20psi on street tyres (good for slicks) but with street tyres below 20psi you start to lose the bonus of letting them down (something to do with the fact they are steel belted) the best pressure is 22-25psi (depending on day)

also if you have aftermarket clutch you should be launching at about 6k for best launch (handbrake on let out clutch till just enguaging then just drop and release handbrake) , with a 4.5k launch you will be dropping of boost for short period (destroys your ET) i stuffed a launch once revs dropped to 2500 and did a 13.6

also with your trap speed of 106mph you should be running mid-high 12's

i have done a 12.7, with 60ft = 1.8 trap speed = 105mph

mods were turbo back zorst, pod filters (no shield) , 11psi boost, tune (car prob made 205rwkw) and full pressure tyres (36psi)

but it is simple as Practice makes Perfect ... play with revs on launch, dont wait till limiter to change gear (i change at 7200-7500) should be changing just after your peak power/torque

and most of all ... have fun ... but thats not hard when you own a skyline

hope that helps

Cheers

RellikZephyr

Edited by RellikZephyr

for launches in a GTRRRRR you need to launch em at about 6000RPM + then u will be amazed... ;)

But u gatta be carefull with ur diff and all that... my mate did a 12.1 in his 32gtr and he was dumping it at 7000rpm, and on stainless steel tyres.. :D and he broke his gearbox 2 days after... his gtr has a full exhaust and cusco soil overs...

for launches in a GTRRRRR you need to launch em at about 6000RPM + then u will be amazed... ;)

But u gatta be carefull with ur diff and all that... my mate did a 12.1 in his 32gtr and he was dumping it at 7000rpm, and on stainless steel tyres.. :D and he broke his gearbox 2 days after... his gtr has a full exhaust and cusco soil overs...

Yep 5500+ I've found to be best with a gentle release of the clutch, got to try with a Jim's clutch soon.

Stainless steel tyres? They'd be a pain to keep clean and a solid ride :-)

When i went to Heathcote, my best time of the day on my stock GTR (R33) was when i changed gears earlier, i crossed the line in 4th gear. I shifted at about or just under 7K and got a 13.2 @ 106. I had a 1.9 60ft aswell, the track seemed really slick compared to the street and she was just spinning all fours, ended up launching at about 4800-5000rpm. On the street it does need 6K plus or else it will bog down (twin plate takes up all the slack instantly).

i found i got to much wheelspin doin limiter launches (strip not quite a grippy as road)

about 5800-6k is the best spot to launch mine i found (on Potenza GIII's and OS Giken twin plate clutch)

with that little bit less wheelspin she hooked up bit quicker

did limiter launch ran 12.88 did a 6k launch got 12.76

and i change gears earlier cause you can feel when she goes past her peak torque (mine approx 7500) and thats when i change

RellikZephyr

When my 32 GTR had 228rwKW it ran a 12.4 @ 181kmh. (112mph)

I'd be changing to 4th before the end of the qtr.

I'm not interested in destoying my car to shave a few tenths so stage my car at around 5500rpm, and feed the clutch out quickly, results in consistent 1.9 60fts

I went from a 340rwHP 2WD RB30ET Skyline previous and I must say launching a GTR is 110% easier and more consistant :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...