Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering is it a good Idea to use Nulon Petrol Injector Cleaner (Add to the petrol tank) ? im bit sacred that it might harm the engine or something like that. I will use anything on my old toyota corolla but for my skyline r33 gts4 (Rb25DE) have to be carefull. If this stuff harm any part of the car smply I wont use it, just need to know...any feedback?

By the way my car is consuming lot of fuel so im in the process of changing the o2 sensor, cant find the correct one for RB25DE non turbo model:(, thinking if this Nulon Petrol Injector Cleaner is safe it might improve the fuel eficiany a bit!!!!!!!!!!!!!!

Cheers

Chinthana

Hi Guys,

Just wondering is it a good Idea to use Nulon Petrol Injector Cleaner (Add to the petrol tank) ? im bit sacred that it might harm the engine or something like that. I will use anything on my old toyota corolla but for my skyline r33 gts4 (Rb25DE) have to be carefull. If this stuff harm any part of the car smply I wont use it, just need to know...any feedback?

By the way my car is consuming lot of fuel so im in the process of changing the o2 sensor, cant find the correct one for RB25DE non turbo model:(, thinking if this Nulon Petrol Injector Cleaner is safe it might improve the fuel eficiany a bit!!!!!!!!!!!!!!

Cheers

Chinthana

shouldnt harm the engine i wouldnt think

I found form experiance that REDLINE SI-1 Fuel Cleaner is the BEST. It is sooo good it cleaned some of the carbon build up from the top of my cylinders.

$26 at Bursons, it is a heat activated agent, really does work well.

I used it in my R33 when i used to get slight flat spots and worked a treat... just reset your ECU when you fill it with premium fuel... i was getting 400kms to a tank in my R33 (nanny shifting) and now getting 700kms to a tank in my N16 Plsar Q lol

The Injector cleaner won't do anything that a lot of high-octane fuels won't. A lot of fuels these days carry detergent to clean up your injectors etc, while the engine is running. I can't imagine it would do harm though, so if you want to spend the money then do so. Personally I wouldn't bother.

You are right to question the safety of this product. I have lost count of the number of people who have had pistons melt as a result of adding Nulon Petrol Injector Cleaner to their fuel.

I used it once with an RB25DET Neo, no effect.

A few occasions with an RB30E I noticed an ever so slight improvement in response, but no effect on power or economy.

So I've come to the conclusion that the RB30 being 250,000-odd kms old had dirty injectors.

The RB25 being 50,000km old was nice and fresh and was always run with decent fuel, thus it didn't need injector cleaner run through it.

Correct me if I'm wrong, but I'm under the impression that the way the injector cleaner works is that it alters characteristics of the fuel which causes it to burn hotter, which in turn burns away some of the crap off your injectors, thus cleaning them. So if all you're doing is cleaning off the little deposits of crap on them, then you wouldn't really get much if any noticeable change. If your injectors are really dirty or blocked then the only way to clean them up to remove the injectors and have them properly cleaned.

Whatever your situation, I seriously doubt it's going to give you any more starting line oomph in the traffic light GP :P

Correct me if I'm wrong, but I'm under the impression that the way the injector cleaner works is that it alters characteristics of the fuel which causes it to burn hotter, which in turn burns away some of the crap off your injectors, thus cleaning them.
The injector is not exposed to the flame, so, yes, consider yourself corrected.

The principle of the injector cleaner is to dissolve bits of resin and crap off the needle of the injector, so that the spray pattern isn't disrupted. And so that the injector always closes completely, preventing excess fuel leaking into the cylinder. Unfortunately it's not always successful. It usually works best in maintaining the injectors after an ultrasonic clean.

You are right to question the safety of this product. I have lost count of the number of people who have had pistons melt as a result of adding Nulon Petrol Injector Cleaner to their fuel.

oooooooh really, I just add this stuff this morning and filled with Shell V power full tank. Are you serious, pistons get melt becasue of this stuff? ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,But how does this possible?

Thanks a alot for your replys gusy, let you know if I see any diff. So far no different yet as you guys already mentioned.

Cheers

Chinthana

i have used it before

no problems whatsoever with the driving characteristics

i acutally used it quite concentrated once and i could feel my idle smooth out ever so slightly. palcebo effect? maybe. but i thought it was significant.

but when it was in my tank i drove very sedately, given i wasn't sure how it would change the characteristics of the fuel and how it burns etc.

  • 2 weeks later...

the only time iv seen injector cleaner work was in my dads taxi lol, he drives it on LPG alot and after a while his injectors became very dirty and when he drove on petrol it would run like shit, a bottle of injector cleaner in a full tank fixed everything :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...