Jump to content
SAU Community

Recommended Posts

The reason why i ask is that i just bought mine and it has aftermarket ones installed. There is, however, a proper button which they are wired up to on the dash...

I have looked at photos of other 32gtrs and have not been able to identify where the standard ones are...

:P

In short, no.

But they are not so uncommon.

I didn't think they did, so do you know what the button is on the right hand side of the steering wheel above the rotating thingy which turns on the headlights and parkers?

They don't, but anyway.

The most common spot for the foglights in under the top section of the front bumper either side of the number plate. Usually the mesh screen for the interccoler/radiator cut out gets a couple of holes cut into it to fit the lights.

Do you know where they normally sit?

They sit right in front of your intercooler, on both sides, small ones.

There is a switch on the dash, its for fog lights and amber lights. Do a search on the forsale section, there had been a few pairs forsale lately.

Oh they might not be standard but definately a standard option.

I didn't think they did, so do you know what the button is on the right hand side of the steering wheel above the rotating thingy which turns on the headlights and parkers?

No, they're definately not standard, but may be an option (but I really don't think?)

The switch you're talking about allows the park lights to be on when depressed with the ignition key removed and the car locked (for when parked in a dark or dangerous position).

yes and no. the ones pictured are a dealer option available at time of purchase. they may have even been fitted at the factory, or if not fitted at the dealer when sold. but they are not standard.

  • 5 months later...

sorry guys.. i know this is an old post but i needed a bit of help. i was after some fog lights that would fit the spaces in my front bar pictured below. a pair would be nice but i dont mind just one and im after the really tacky looking yellow plastic covered ones.. any help would be great..

cheers, tushar

post-40010-1190510678_thumb.jpg

Why would you want to put fog lights in there? People usually leave it open for more air flow to the intercooler/radiator. If you want a fog light to be put in there, measure out how large the gap is and find a light to fit. I would assume it'll be hard finding some that fit perfectly though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...