Jump to content
SAU Community

Recommended Posts

was racing a car and the dash board lit up at high revs. i was doing 190kph... (bad boy i know).

done it since i installed the pfc.. got me worried.

opinions anyone?

wel i guess if u dnt drive so fast it wont happened lol.

knock sensor or another sensor reaching it's max value.

see -> http://www.skylinesaustralia.com/forums/in...showtopic=64201 for more info re pfc

btw 190km/hr, hope you were on a track or something..

nothing to worry about just keep nailing it as much as you can. if the engine check light keeps coming up just removed the bulb, or colour the little lense bit in black so it's not so distracting at 190kph.

nothing to worry about just keep nailing it as much as you can. if the engine check light keeps coming up just removed the bulb, or colour the little lense bit in black so it's not so distracting at 190kph.

And when u see white smoke out the back at 200k thats ur special smoke screen get away counter measures. dont worry about the little bit of oil on ur windscreen and the funny noises it will kepe going as long as u dont back off.

Seriously tho, do u mean the engine check light? or all lights get brighter than compared to on idle?

Edited by tmc_2

Will be your knock reading was over 60, or you are maxing your injectors or afm, but it will almost certainly be your knock reading is too high. You have had the car tuned since the PFC has been installed right?!

Also you should really know how to read these things from your PFC if you are going to run a car with aftermarket engine managment or you can get into lots of trouble, i.e. exploded bits!

was racing a car and the dash board lit up at high revs. i was doing 190kph... (bad boy i know).

done it since i installed the pfc.. got me worried.

opinions anyone?

The PFC has, knock warning, injector duty cycle warning, AFM voltage warning etc all of which flash the dash warning light.

So, take it back to whoever tuned the PFC and let them fix the tune (for free), before you have to fix the engine (for $lots).

:dry: cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...