Jump to content
SAU Community

Recommended Posts

gday, very happy to have joined SAU

a week ago I ordered vertex bodykit and front mount intercooler to assemble myself

i've already installed the front mount and frontbar, my problem is

got no money to paint it, and already considered painting the entire car a different colour

the car is black, kits primed ready for paint, its in a slight cream colour, should I?

paint it black with 5 dollar spray cans, so it doesn't look stupid?

or leave it as (frontbar in cream colour) and wait till next year?

if you got other suggestions please

cheers guys, much apperciated

gday, very happy to have joined SAU

a week ago I ordered vertex bodykit and front mount intercooler to assemble myself

i've already installed the front mount and frontbar, my problem is

got no money to paint it, and already considered painting the entire car a different colour

the car is black, kits primed ready for paint, its in a slight cream colour, should I?

paint it black with 5 dollar spray cans, so it doesn't look stupid?

or leave it as (frontbar in cream colour) and wait till next year?

if you got other suggestions please

cheers guys, much apperciated

Leave your standard frontbar on there until you can afford to respray it the same colour as your car.

You probably should of savedup enough for both the bodykit and frontbar before you brought it. :rofl:

gday, very happy to have joined SAU

a week ago I ordered vertex bodykit and front mount intercooler to assemble myself

i've already installed the front mount and frontbar, my problem is

got no money to paint it, and already considered painting the entire car a different colour

the car is black, kits primed ready for paint, its in a slight cream colour, should I?

paint it black with 5 dollar spray cans, so it doesn't look stupid?

or leave it as (frontbar in cream colour) and wait till next year?

if you got other suggestions please

cheers guys, much apperciated

No dont do it. It will cause more work for the guy that is painting it and will cost more. Just leave the standard on until you get enough cash. Makes you save faster and get the job done.

thank's a lot guys, i will not be using 5 dollar spray cans !! lol

i know aye, should have saved up d'oh... saving up for this kit was hard enough

anyway, i was going to use the front mount money to spray it, but when i saw that kit at the shop, it said "buy me im cheap"!!

i will save up for this respray, may not spray the entire car after all...

prices on bodykit respray (frontbar, sideskirts, rearbar) about $600?

*pearl black

you can get a fair/good (not immaculate) result if you really know what you are doing. I think its essential to have perfect even strokes and do each layer very lightly. Then shitloads of clear afterwards to smooth out edges. Then buff/wax. Can't say I've tried it tho =)

actually yeah I can! I tested this method before on old side skirts in gun metal grey... and they turned out ok considering I was not doing a very good job and not enough clear and no buff afterwards.

Edited by Alien

seriously nothing beats a 2pak paint job mate.. Yes you will do an ALRIGHT job on the front bar.. But if you want it to one day match the rest of the car ur going to have to strip that shit job you did!

If anything buy the paint, a compressor and air gun and do it like that .. sanding between coats with 2000grit paper and layering the top with a shitload of clear and buff it till its balld!

Otherwise you can save up $1000 and get a whole kit sprayed.. prob less if you find a cheaper guy and you can handle a half decent go!

may even look at a practice spray booth for learners!

seriously nothing beats a 2pak paint job mate.. Yes you will do an ALRIGHT job on the front bar.. But if you want it to one day match the rest of the car ur going to have to strip that shit job you did!

If anything buy the paint, a compressor and air gun and do it like that .. sanding between coats with 2000grit paper and layering the top with a shitload of clear and buff it till its balld!

Otherwise you can save up $1000 and get a whole kit sprayed.. prob less if you find a cheaper guy and you can handle a half decent go!

may even look at a practice spray booth for learners!

spray painting is good fun if you have time and place to do it at - its quite a usefull skill

lol yeh man save up... i have an air compressor and a fairly good spray gun, and believe me it aint easy to get right... iv done a few and still get the odd runs or drips on the kits.... so i say just save up and do it right.... looks 1000 times better in the end

Edited by mass_iv

I have a pearl white 'line and have a problems with the bottom lip part scraping the street (like most). I took it off, sanded it down, and painted it matte black (spraycan). Look very JDMish nice and when it gets scraped a bit, is extremely easy to touch up. Don't think I would do the whole front though.

Also if you do wanna do it urself in this sorta way dont use a $5 spray can. Go to car paint supplier, they can colour match your car and put it in a pressure pack. at least this way you are starting with the right colour for your car and are using real car paint aswell

I went to the local paint shop and got the paint colour matched and put in spray cans...used about 8 full cans (could have been 6 but was 1st time spraying anything substantial so had a few stuff ups).

They painted my front and rear bars and my side skirts and only cost like $120 and turned out tops and will last till the whole car gets sprayed...

If you have a day free and want to try something new I would recommend it...if it looks bad you have only wasted like $30 so no real issue and a bad paintt job in the right colour looks better than grey primer anyday.

Edited by clakka

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...