Jump to content
SAU Community

Recommended Posts

  • Replies 765
  • Created
  • Last Reply

Top Posters In This Topic

Had a fair crack at fixing the ignition and fuel maps this morning.

Adjusted the scale on the A/F target, Ignition, and INJ1 to:

Start at 4000 rpm and finish at 7200 for rpm's

Start at 3.0V and finish at 5.0V for input voltage.

Still got a fuzzy bit in the ignition timing around 6000 rpm's where the timing goes from + to - with only one row of 0's seperating them.

Might have to space it out a bit further apart with the scale changer.

Heres a pic of my new datalog:

Still some work to do, but the AFR's are looking really nice now. Power delivery is very much improved.

nearly_fixed.doc

what is the serial number on the back?

hey got mad082 to help he changes 1 and 6 around and it works okay still has a small miss. what should pulse rate be??? there 550 cc inj

Could you please tell me exactly what was swapped around to fix the miss you said you had on your injectors UCD15R33?

You said someone changed 1 and 6 around? You mean removed and swapped injectors around or whats the go?

Just curious what fixed it for you because I had a severe miss with one of the injectors I was using.

Mad082- he swaped my injector 1 and 6 and resealed them using grease cause number 6 wasnot sealing. But now I need lag time cause it has a miss when u add loan and a/f ratio is very lean.

Hello

I want to install the e-manage ultimate in my r33 gts25t spec 2 -97

What do I need more than this ?

https://www.rhdjapan.com/jdm/TRUST-E-Manage...c-Harness-24517

for ecr33

and the Ecu https://www.rhdjapan.com/jdm/TRUST-E-Manage...Main-Unit-18517

Does I need any moore parts ?

Is it just bolt on and then I can take my car out for a ride ?

I want to drive with a Map sensor instead of the afm is that possible and what do I need for that ?

Best regards

Simon from Sweden ( sorry if you don´t understand)

Your going to need the pressure sensor as well as the pressure sensor harness. Also get a usb cable to connect to pc.

It is just bolt on and go, although you need to connect it to a laptop or pc to configure it before you start it the first time. This is to tell the emanage what type of car its connected to and what it has that isnt standard. Once its configured it will still be outputting the exact same ignition and fuel signals as the standard ecu signal thats coming in. The maps need to be adjusted on a laptop via a usb cable to make any changes to the ignition or fuel ect.

When you have done this, you will need to create a map BEFORE connecting up the map sensor and removing the air flow meter. This is explained on this thread a few pages back.

hey im working on getting a new interface for the ultimate up and running, can someone post up a ultimate datalog? or email me one NOW? i left all my shite at home :( and need it it kinda urgent so they can decipher it.

[email protected]

This might be a crazy idea, and I'd say someone has tried it before:

To upgrade injectors on my r33, leave standard FPR, Injectors and rail.

Buy (1) 900 to 1000 cc top feed high impedance injector. $80

Using the emanages extra injector driver chanel, weld a bung into the intake pipe before the throttle plate for the injector.

Make up a hose from the rail to the injector and bring it into operation at around 4000 rpm.

6 * 380cc = 2280

6 * 555cc = 3330

6 * 380cc + 1000cc = 3280

Any thoughts?? :rofl:

Cheers for the advice really appreciate it, think I might go for the ultimate, the modifying process is a never ending one as i'm sure you know. So better to be prepared.

I had an Ultimate in my R33 GTS-t and it could never be tuned right.

It was boost spiking at certain levels(between 2500 & 4000) despite proper tuning!

Ripped it out and popped in a Power FC!

Best thing i ever did.

I had an Ultimate in my R33 GTS-t and it could never be tuned right.

It was boost spiking at certain levels(between 2500 & 4000) despite proper tuning!

Ripped it out and popped in a Power FC!

Best thing i ever did.

tuned or installed incorrectley 1000000%

r33 is a piece of piss and works fine... done around 30 now.

Sorry to dig up this post, but I have a question about the EMU that has not been addressed at all in this thread.

Will the rev limiter cut function work with the RB20/25/26 ECU's? I have tried in vain to raise the rev limit of my S1.5 RB25DET using this feature. No matter what I set the TP%, cut time, hold & limit values, and injector duty cycle times to, the engine will not rev past 7000 rpm. I am using the P&P N-4 harness with my EMU, and have repinned it accordingly.

If anyone out there has gotten this to work, please share what you've done. Thanks!

BTW, I am in the U.S. and have the 25 squeezed into my S14a (will link pix if requested) :)

URAS, I also PM'd you about this and a few other things but have not heard back. If you have some time I'd really appreciate a response.

Sorry to dig up this post, but I have a question about the EMU that has not been addressed at all in this thread.

Will the rev limiter cut function work with the RB20/25/26 ECU's? I have tried in vain to raise the rev limit of my S1.5 RB25DET using this feature. No matter what I set the TP%, cut time, hold & limit values, and injector duty cycle times to, the engine will not rev past 7000 rpm. I am using the P&P N-4 harness with my EMU, and have repinned it accordingly.

If anyone out there has gotten this to work, please share what you've done. Thanks!

BTW, I am in the U.S. and have the 25 squeezed into my S14a (will link pix if requested) :banana:

URAS, I also PM'd you about this and a few other things but have not heard back. If you have some time I'd really appreciate a response.

sorry i get bombarded with pm's so i miss a few :blush: can you email me a datalog of the car hitting rev limit say in 3rd? and also your map, i will then try figure it out and send it back ASAP. i will also explain how to do it based on your info :)

email it to [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...