Jump to content
SAU Community

Recommended Posts

I went out there with a friend to film his ute.

i took my gtr out but didnt run. i dont find drag racing that interesting. but wouldnt mind doing it once so i can be a sick c**t.

i filmed two guys out there, one in a black gtr that was fairly stock by the looks of it, you did a great last run which i dont think i got on film

and the red one, i got you a few times also but it seemed your launches were letting you down.

if you want the footage i have i will rip it off the camera later today and send it to you, (if your on here) let me know.

Andrew

Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/
Share on other sites

Warned for an 11.8 WTF. so you need to tack the cooler piping. tell me when, i will come over and you can do mine as well :happy:

Ha, I'm going to get those tuff clamps from just jap to enclose that massive 1.25 bar of BOOOOOOst psi!!!

It gave me the s$%ts.

Yeah, run quicker than 12sec now and you need andra license $120, I'm sure.

Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017088
Share on other sites

I didn't get towed! It drove under it's own NA power!

Got a best time of 12.4. Revving it too far for turbos power band, I guess.

Worst 23.0 NA baby!!!

Michael's black GTR ran a 11.8 and got warned!

Oh na power on the gtr is loads of fun :(

now i know why i dont want to go drag racing. the 45 bucks will soon turn into $165 i think i'd rather a track day :D

i'm going to check out pritek for some clamps mine are giving me the shits too.

Edited by Angus Smart
Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017386
Share on other sites

only clamps worth buying imo: sard dual bead clamps. not too hard on the wallet either. i have put them on the GTR and have never blown a hose in 3 years...

No need to go for Sard specifically - Pirtek sells some serious clamps which I have used on the GTR and my S14 in the past and they never let me down.

Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017597
Share on other sites

yeah it's just that sard are the only ones I've seen that have 2 beads which means they will hold a good seal with much less physical force (no need to tighten them up to buggery like with the single bead clamps). you are right, there is no reason conventional clamps wont work fine if used properly though.

Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017633
Share on other sites

Ha, I'm going to get those tuff clamps from just jap to enclose that massive 1.25 bar of BOOOOOOst psi!!!

It gave me the s$%ts.

Yeah, run quicker than 12sec now and you need andra license $120, I'm sure.

Im pretty sure its 11sec and under you need that licence

Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017769
Share on other sites

yeah it's just that sard are the only ones I've seen that have 2 beads which means they will hold a good seal with much less physical force (no need to tighten them up to buggery like with the single bead clamps). you are right, there is no reason conventional clamps wont work fine if used properly though.

its the problem with conventional ones they are like a use once and replace deal. but they definatley do the job if they are in good condition :huh:

Im pretty sure its 11sec and under you need that licence

11.99 to be exact :laugh:

Edited by Angus Smart
Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017782
Share on other sites

Ha, I'm going to get those tuff clamps from just jap to enclose that massive 1.25 bar of BOOOOOOst psi!!!

It gave me the s$%ts.

Yeah, run quicker than 12sec now and you need andra license $120, I'm sure.

Im pretty sure its 11sec and under you need that licence

you do know that means the same thing, yeah? unless you mean 10.99 and below

below 12sec you need andra licence.. .below 10secs you need to get a roll cage and meet other wsid requirements

Link to comment
https://www.sau.com.au/forums/topic/162311-wsid-lastnite/#findComment-3017972
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
×
×
  • Create New...