Jump to content
SAU Community

Recommended Posts

He fixed the reverse and is all good 3 years on....but the 4 gear syncro problem reappeared after close to 2 years had passed....and i do NOT flat shift :)

thinking about another rebuild now....:)

Yeah, I'm getting the impression that 4th synchro is piss-weak in this 'box. Seems to be a common complaint. It's making Me think I should've looked harder at a gearbox conversion, but then I really don't want My car off the road for a month while I sort something out - Life sans-wheels SUCKS !

Yeah, thanks abcent - A mate in the trade is seeing in the morning if he can get a changeover from Japanese Gearbox Wholesalers in Rowville, if not I'll probably flip a coin between 360 and Competition - they both sound pretty good, and charge similar rates, and they're practically a stone's throw from each other !

You got an address to this gearbox changeover business in rowville?

Are they open to the public or only to mechanics

Thanks

edit: found

http://www.japanesegearbox.com.au/intro.html

This is like around corner from me! must check it out, thanks for mentioning it :thumbsup:

You got an address to this gearbox changeover business in rowville?

Are they open to the public or only to mechanics

Thanks

edit: found

http://www.japanesegearbox.com.au/intro.html

This is like around corner from me! must check it out, thanks for mentioning it :thumbsup:

NOOO changeover boxes for R33 GTS-T there, and apparently they're not too fond of doing parts - i.e. whole 'box or bust.

NOOO changeover boxes for R33 GTS-T there, and apparently they're not too fond of doing parts - i.e. whole 'box or bust.

Crosses off rb25 gearbox conversion off list.

If they can do a changeover for my rb20 gearbox for cheap i might go ahead with it! ^^,

I've dealt with Stuart (owner) at JGW before, nice guy and he helped me out when dealing with nissan over gearbox issues, but never actually got anything from him so can't comment on what his stuff is like... he seemed to know his stuff, but i think snowy had troubles with his gearbox there...

Well, the bad news is in . . . . .

Nissan have superseded the parts I need (or something), the upshot being that I'd need to buy complete cluster sub-assemblies, which would put the total rebuild bill over $4000.

I shit You not.

P.s. Competition Gearboxes have been great, & both they & 360 Gearboxes can still do a bearings & Synchros rebuild at SURPRISINGLY good prices. I'd suggest anyone with 4th gear selection problems think about a preventative rebuild.

Nissan have superseded the parts I need (or something), the upshot being that I'd need to buy complete cluster sub-assemblies, which would put the total rebuild bill over $4000.

Justjap advertises rb25 boxes for $3200 so i assume you could get them even cheaper shopping around direct from Nissan.

http://justjap.com/parts_ngearbox.htm

Just in the process of cleaning-up the 2nd hand 'box, to install this week/end.

Pics of the old, dismantled box:

5th/Reverse Lockout open:

Image076.jpg

5th/Reverse Lockout ENGAGED:

Image075.jpg

H-Pattern the sits below the gearstick . . . . who wants to do a big one inside the cabin - Ferrari Style? ! !

Image077.jpg

Busted Selector Fork (Notice the worn-smooth bit, where it's jumped-up onto the selsctor Ring when it jammed):

Image065.jpg

It's even got the rib broken-out:

Image064.jpg

Hmmmm, What's missing here:

Image063.jpg

1st/2nd Fork on the left - notice how it's NOT BROKEN ! !

Image060.jpg

More Brokenness:

Image061.jpg

I keep on finding bits & Chunks of Aluminium throughout the 'box, not cool. Apparently that's ok though, coz the gear teeth are so hard it just squashes 'em and spits 'em out into the oil ! (hence the T-1000 oil)

  • 2 weeks later...

WOO HOOOO ! ! ! !

I Went with a cheap 2nd Hand gearbox, which is in, and it feels FINE ! :) Fingers crossed !

Looks like I've got an R33 GTR gearset, and a GTS-T casing + output shaft + spares galore for sale. Make Me an offer !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...