Jump to content
SAU Community

Recommended Posts

i usually drive from sydney up to brisbane , ever few months ... 10.5 is my shortest time .

few tips

- take coffee or some ice coffee if your driving at night like i do

- heaps of music

- lollies - chew chew chew - really does help ( numerous times iv felt like i was gonna fall asleep)

your car should be fine regardless of how its running now - unless you have major problems which your worried about . be sure to check all your liquid levels , etc ....

safe trip - cheers

I'm might be driving down from Brisbane to Melbourne in July. This thread is really useful! But I'm wondering, is it easy to obtain 98 octane fuel along the way?

Occasionally while driving along the highway, I see big pieces of tyres lying on the road as well. What would cause such things to happen?

I'm might be driving down from Brisbane to Melbourne in July. This thread is really useful! But I'm wondering, is it easy to obtain 98 octane fuel along the way?

Occasionally while driving along the highway, I see big pieces of tyres lying on the road as well. What would cause such things to happen?

You will be fine for 98 Fuel along that route if you plan your distances ! Its when you go inland It gets messy for fuel and maintenance if something goes wrong.

The big bits of Rubber you mention are from truck Re-cap blow outs. The trukie should try to collect most of it after it blows but that can also be dangerous traffic wise depending on where the trye blows.

also get roadside assistance in your state RACQ ,NRMA etc ... its to cheap not to have

Edited by ish
You will be fine for 98 Fuel along that route if you plan you distances ! Its when your go inland It gets messy for fuel and maintenance if something goes wrong.

The big bits of Rubber you mention are from truck Re-cap blow outs. The trukie should try to collect most of it after it blows tbut hat can also be dangerous traffic wise depending on where the trye blows.

also get roadside assistance in your state RACQ ,NRMA etc ... its to cheap not to have

Okay, thanks! I won't be packing any octane booster then ^_^

i usually drive from sydney up to brisbane , ever few months ... 10.5 is my shortest time .

did my first trip recently between the two, 10hours with a second driver, left sydney at 2am after chinese new years so took years to leave the city...

if travelling at night be careful with fuel stops

I'm might be driving down from Brisbane to Melbourne in July

See if you can beat aphids 12 hours! :)

I did melbourne to sydney and back. On way up 10hours with 2 stops and copper on my ass for 150km (90km/h). Way back 18hours with atleast 6 stops and 2 sleeps :laugh:. Both trips were within 3 days and i was pissed day between.

Live in the Territory and regularly do a 400km return trip to work in my32GTR sometimes 600 if I have to go to the next main town If your cars in good nick should have no drama's, Other than fuel and radar gun/revenue raisers. Usually use about a tank full of petrol but have on one occasion playing with a supercharged CLK Merc on the highway, before they introduced speed limits, used over half a tank for the first 100km's playing!! Was fun and he couldn't believe he couldn't keep up.

Drive like its a loaded to the roof car and u should be fine and not cost the earth in fuel:)

Usually use about a tank full of petrol but have on one occasion playing with a supercharged CLK Merc on the highway, before they introduced speed limits, used over half a tank for the first 100km's playing!! Was fun and he couldn't believe he couldn't keep up.

hehe nice work!! :P

I've done 3 driving trips Adelaide to Brisbane and back in a Nissan Import, 2 of those trips were in a Turbocharged car (silvia 2L turbo, and more recently my S2 Stagea).

The stagea is modified as in my sig, ~160awkw and it ran beautifully all the way.

The only issue I had was with 96 octane premium fuel between adelaide and parkes, but between parkes and brisbane you can go the whole way on bp ultimate 98. With the 96 octane fuel it was fine except for one time when I went to overtake it pinged a bit when it hit full boost so I had to take it a bit easier after that. Cruising along at and up to 110 was no problem at all though so people should be ok with 96 octane fuel but just dont push it too hard. :(

My wife & I do the trip in 1.5 days (stopping overnight at a motel), sharing the drive. Its usually about 22-23 hours total driving time and thats about 15-16 hours on the first day and only about 6-7 hours on the second day. We've only got the stock SMIC (same as r34 one) and the car had no overheating issues or anything.

So like others have said, you should have nothing to worry about. Just make sure your car is in good running condition and all should be fine. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...