Jump to content
SAU Community

Recommended Posts

well our stagea wont be here yet.. so we are more than likley come and meet you guys then see what we can wrangle as far as a lift goes?

Looks like a good cruise. Kristie will you be distributing the map at the meet points only? or will you publish online earlier?

  • Replies 157
  • Created
  • Last Reply

Top Posters In This Topic

well our stagea wont be here yet.. so we are more than likley come and meet you guys then see what we can wrangle as far as a lift goes?

Looks like a good cruise. Kristie will you be distributing the map at the meet points only? or will you publish online earlier?

hehehe im sure if you need a lift people will offer..we are all friendly :domokun:

as for the maps sean...maps are given out at city west :no:

also if you have mates you want to invite to join...can you let me know so i can print enough maps off :P thanks guys/gals

no probs! secret squirrel maps!

hehehe im sure if you need a lift people will offer..we are all friendly :domokun:

as for the maps sean...maps are given out at city west :no:

also if you have mates you want to invite to join...can you let me know so i can print enough maps off :P thanks guys/gals

I thought you guys were cruising to Rockhampton for this cruise?

Yeah, via Sydney for the SAU-NSW Show and Shine...

:domokun: a user called chuckie accidentally reported this thread to mods :no: here is his responce:

Hahaha, I got that too. I'm guessing he accidentally clicked on "Report" instead of "Reply"

im in for cruise :D long as i remember, considering i dont check the forums often anymore

everyone look for a stock as a rock black gto and thats me :)

stagea still under repairs from last engine problem

hey mitchy can u bring that power steering bracket along if u head down and remember :)

cheers mate

Edited by overpowered

Ok guys, the maps are ready to go...Some Southies are concerned that having to drive into Perth City West and then head back to Freo for one of the stops isnt what they want and is too much...so if the southies want to meet at the Freo stop or the Cottesloe stop we can pick you all up there! (Alternatively some people have issues with maps not being given out prior to the cruise --which i have never done or ever attended a cruise where this has happened..but if people want maps before i can post them up in pms, and you can print off your own and join the cruise wherever you like) Please note we are having two photo opportunities being the final location and one in the freo area

Some people are also concerned that the captain munchies stop is a fast food joint..we are there to have a stop, but it also gives people enough time to grab a drink or toilet or whatever...this is not a stop for lunch...people can eat if they want but if people are concerned about the picnic area, i and Sean have made sure the final location has areas for that like i mentioned in the beginning!

This should be a good cruise hopefully and please if you want to come post your name up and ill add you to the front post if i havent already :( thanks guys see you sunday :(

good work ! sounds like you have everything well thought out and under control :(

if you need a hand let me know. do you need anyone to bring BBQ implements?

tongs / flippers etc?

Ok guys, the maps are ready to go...Some Southies are concerned that having to drive into Perth City West and then head back to Freo for one of the stops isnt what they want and is too much...so if the southies want to meet at the Freo stop or the Cottesloe stop we can pick you all up there! (Alternatively some people have issues with maps not being given out prior to the cruise --which i have never done or ever attended a cruise where this has happened..but if people want maps before i can post them up in pms, and you can print off your own and join the cruise wherever you like) Please note we are having two photo opportunities being the final location and one in the freo area

Some people are also concerned that the captain munchies stop is a fast food joint..we are there to have a stop, but it also gives people enough time to grab a drink or toilet or whatever...this is not a stop for lunch...people can eat if they want but if people are concerned about the picnic area, i and Sean have made sure the final location has areas for that like i mentioned in the beginning!

This should be a good cruise hopefully and please if you want to come post your name up and ill add you to the front post if i havent already :( thanks guys see you sunday :P

good work ! sounds like you have everything well thought out and under control :(

if you need a hand let me know. do you need anyone to bring BBQ implements?

tongs / flippers etc?

with the help from you dale and brett i think we have it covered :( i thought that if people want a bbq they will bring what ever they want, ie bbq implements their own meat/ etc and for those that just want a picnic they will bring their own gear as well..does that sound ok????

also just double checked with the serpentine/jarrahdale council and they said that there is bbq's , they are gas and are free at the dam area..there is also one side that has a gravel picnic area with playground and bbqs and the other side near the bridge which has picnic area no playground and bbqs on grassed area :P i figure we can decide on the day which one people would prefer to stop at ;)

And the weather forcast is.......Early shower then fine. Min 9 Max 19

Soooo...... that means I get to use my heated seats!!! And we might all make use of the Atessa (maybe) then fine for the BBQ!! Cool

I'll post up the weather again on Saturday.

good work ! sounds like you have everything well thought out and under control :sleep:

if you need a hand let me know. do you need anyone to bring BBQ implements?

tongs / flippers etc?

Hey Sean, are you confused, we're only going near the beach not to the beach. You don't have wear flippers, and thongs has an H in it, :laughing-smiley-014:

the cruise sounds like it is going to be good...my car will look AVERAGE around all those other stags haha,i dont even hav an exhaust!!! doesnt matter but just curious as to what time it will finish?my mrs aint comin due to other plans and just to keep her happy a time would keep me outta trouble,thanks.

the cruise sounds like it is going to be good...my car will look AVERAGE around all those other stags haha,i dont even hav an exhaust!!! doesnt matter but just curious as to what time it will finish?my mrs aint comin due to other plans and just to keep her happy a time would keep me outta trouble,thanks.

hahaha our stagea's are both stock..so you wont be out of place LOL

as for a time i would suggest we will be at serpentine dam at around 12.30 so whether you stay to then, or if you stay to eat im not sure, but we should be at the final stop around 12.30/1ish at the latest hopefully :sleep:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...